In magnetohydrodynamic (MHD) flows turbulence reduction occurs due to the Joule dissipation. It results in heat transfer degradation. In open channel flows, heat transfer degradation is also caused by the turbulence redistribution near the free surface. Both effects can be significant in fusion applications with low-conductivity fluids such as molten salts. In the present study, the ‘‘K–e’’ mod...

k This study investigated the Navier-Stokes L computations of the surface heat transfer coefficients of a transition duct flow. A transition duct from an axisymmetric n cross section to a nonaxisymmetric cross section, is usually used to connect the turbine exit to the nozzle. As the gas Pr turbine inlet temperature increases, the transition duct is subjected to the high temperature at the gas ...

In this paper, convection heat transfer of Al2O3-water nanofluid turbulent flow through internally ribbed tubes with different rib shapes (rectangular, trapezoidal and semi-circular) is numerically investigated. For each rib shape, the optimum geometric ratio and volume fraction were calculated using entropy generation minimization technique. The governing equations in...

Experiments have been performed to assess the utility of unsteady one-dimensional heat conduction modelling for the calculation of heat losses during a free piston compression process. Heat transfer measurements have been obtained within a gun tunnel barrel using surface junction thermocouple instrumentation. The gun tunnel was operated with a relatively heavy piston such that the shock waves i...

Experimental data was generated by performing the experiment on a plate heat exchanger for water/water system, at different flow rate and different hot water inlet temperature, at steady state conditions. Overall heat transfer coefficient (U) is determined for the performance evaluation of plate heat exchanger. The thermal properties of water (thermal Conductivity, Specific heat and density) at...

[1] Routine radiation and meteorological data at South Pole Station are used to investigate historical discrepancies of up to 50 W m 2 in the monthly mean surface energy budget and to investigate the behavior of turbulent heat fluxes under stable atmospheric temperature conditions. The seasonal cycles of monthly mean net radiation and turbulent heat fluxes are approximately equal, with a differ...

Nowadays, heat exchangers with twisted-tape inserts have widely been applied for enhancing the convective heat transfer in various industries such as thermal power plants, chemical processing plants, air conditioning equipment, refrigerators, petrochemical, biomedical and food processing plants. In general, twisted tape insert introduces swirl into the bulk flow which consequently disrupts a th...