A silane-based adhesive formulation, used in the aerospace industry, was studied using sub-nanometre spatially-resolved energy loss spectroscopy, as a function of the concentration of silane used in the adhesive. The changes in the relative oxygen concentration and the occupancy of p-type states in the oxygen density of states reveal the existence of a composite layer between the aluminium and ...

This paper is to study the effect of surface coating and silane hydrophobic agents for high performance concrete durability in a marine environment of tidal zone and splash zone by exposure test in JiaoZhou Bay. The results indicated that surface coating had good protection and coating quality after a 5-year period and the adhesive strength with concrete surface was more than 2.5 MPa. Surface c...

objective: repair of an indirect restoration is usually preferred over its replacement. this study aimed to evaluate the effect of silane in different surface preparation techniques on the bond strength of direct to indirect composite resin.   methods: for this in vitro experimental study, 48 indirect composite cubes were fabricated, divided into 4 groups of 12 and subjected to the following pr...

Microcrystalline silicon solar cells with AM 1.5 conversion efficiency above 5 % have been deposited at deposition rates in excess of 10 Å/s. This is achieved by VHF-GD at an excitation frequency of 130 MHz. By increasing the plasma power at a dilution ratio of 7.5 % silane/(silane+hydrogen) there first appears a morphological transition from a-Si:H to μc-Si:H and then an increase in deposition...

By the introduction of an organic silane self-assembled monolayer, an interface-engineering approach is demonstrated for hole-conductor-free, fully printable mesoscopic perovskite solar cells based on a carbon counter electrode. The self-assembled silane monolayer is incorporated between the TiO2 and CH3NH3PbI3, resulting in optimized interface band alignments and enhanced charge lifetime. The ...

We report a general method to synthesize gold nanocrystal micelles with organo-silane headgroups. The method involves encapsulation of monodisperse, hydrophobic gold nanocrystals within the core of a micelle of an amphiphilic silane precursor. Formation and stability of monodisperse gold NC micelles have been confirmed using UV-visible spectroscopy and transmission electron microscopy. Self-ass...

Background Bonding to silica-based ceramics requires micro mechanical (hydrofluoric-acid, HFetching) and chemical (silane) coupling [1–5]. The HF-etching provides dissolution of Abstract Statement of problem: The hydrofluoric acid (HF) is able to promote selective dissolution of the glassy phase in silica-based ceramic. However, the etching leaves insoluble silica-fluoride salts in the surface ...

Crystal structures of silane have been extensively investigated using ab initio evolutionary simulation methods at high pressures. Two metallic structures with P2₁/c and C2/m symmetries are found stable above 383 GPa. The superconductivities of metallic phases are fully explored under BCS theory, including the reported C2/c one. Perturbative linear-response calculations for C2/m silane at 610 G...