The influence of composition and purity of titanium on the mechanical properties and the transformation temperatures of Ni-Ti alloy dental castings was investigated by tensile testing and differential scanning calorimetry (DSC). The compositions of the ingots were 49.0-49.2 at% of titanium content. Three grades of titanium of relatively high purity were used as starting materials. The result sh...

Due to recent concern about allergic and toxic effects of Ni ions released from TiNi alloy into human body, much attention has been focused on the development of new Ni-free, metastable beta-type biomedical titanium alloys with a reversible phase transformation between the beta phase and the alpha'' martensite. This study investigates the effect of the stress-induced alpha'' martensite on the m...

Tungsten and titanium oxide (WO3/Ti) nanowires (NWs) were grown by thermal oxidation of a tungsten and titanium alloy (WTi) metallic layer deposited on 2 × 2 mm2 alumina substrates by DC magnetron sputtering. Thermal oxidation was carried out in a custom evaporator chamber. Several parameters were controlled to achieve the optimal growth conditions. Morphological and structural analysis were pe...

Influence of initial surface roughness on friction and wear processes under fretting conditions was investigated experimentally. Rough surfaces (Ra=0.15-2.52 μm) were prepared on two materials: carbon alloy (AISI 1034) and titanium alloy (Ti-6Al-4V). Strong influence of initial surface roughness on friction and wear processes is reported for both tested materials. Lower coefficient of friction ...

To improve the fretting damage (fretting wear and fretting fatigue) resistance of Ti-811 titanium alloy, three Cu/Ni multilayer films with the same modulation period thickness (200 nm) and different modulation ratios (3:1, 1:1, 1:3) were deposited on the surface of the alloy via ion-assisted magnetron sputtering deposition (IAD). The bonding strength, micro-hardness, and toughness of the films ...

Introduction: Fretting mediated mixed-metal corrosion at the taper-socket interface in modular hip prostheses is an issue of continuing concern. Fretting can be reduced by decreasing micromotion or by improving the tribological properties of the material components at this interface. Ion-implantation and diffusion hardening processes are hypothesized to increase the resistance of the titanium a...

The application of implants for dental and orthopedic surgery has increased rapidly within the past few decades. In craniomaxillofacial surgery, different implant systems have been applied, for example, for dental and bone replacement or osteosynthesis plates and screws. These implants may be made of pure titanium or a titanium alloy, usually titanium-aluminumvanadium (Ti-6Al-4V). The surface c...

PURPOSE The aim of the presented research was to find a combination of surface modification methods of implants made of the Ti-6Al-4V ELI alloy, that lead to formation of effective barrier for metallic ions that may infiltrate into solution. METHODS To this end, the following tests were carried out: roughness measurement, the voltamperometric tests (potentiodynamic and potentiostatic), and th...

Wide use of titanium alloys results from their unique physical and chemical properties 1 . Combination of low density and improved corrosion resistance with good plasticity and mechanical properties determines application of titanium alloys in such industries as aviation, automotive, power and shipbuilding industries or architecture as well as medicine and sports equipment. Despite numerous adv...

Titanium screws have properties that make them ideal for applications that require both a high strength-to-weight ratio and corrosion resistance, such as fastener applications for aviation and aerospace. The fracture behavior of Ti-10Mo-8V-1Fe-3.5Al (TB3) alloy screws during assembly was explored. Besides visual examination, other experimental techniques used for the investigation are as follow...