Unlike the recycling of particleboards, medium-density fiberboards (MDF) is not a widespread industrial practice, and currently, most waste MDF panels are landfilled or incinerated after end their life cycle. Therefore, it great importance to develop cost-effective methods for recycling. The extraction resins used bonding panels, mostly urea–formaldehyde (UF) resins, carried out mainly with hyd...

Urea-formaldehyde (UF) resin (F/U: 1.25), melamine-urea-formaldehyde (MUF) resin (F/(U+M): 1.05), and three kinds of wood species including poplar (Populus davidiana Dode), beech (Fagus engleriana Seem.), and eucalyptus (Eucalyptus robusta Smith) were used to produce plywood. The effects of sealing treatment and wood species on the formaldehyde emissions were studied. The anatomical characteris...

this study evaluated the effects of end to end joint types of athel stripes at three level (end to end basic, end to end mitrated and end to end half lap joint) used in core layer veneered with three wood species (fir, beech and oak) and glued with three different ratio of melamine formaldehyde/urea formaldehyde resin (0:100, 25:75 and 50:50) on the bending strengths of bloakboard. according to...

background: human hair can be used as an inexpensive and accessible adsorbent to remove a variety of pollutants from air. although several studies have been done on removal of formaldehyde from wastewater by human hair, to date no study has investigated using hair to remove formaldehyde from air. therefore, the aim of this study was to remove formaldehyde from synthetic contaminated air by a re...

in this research, the effect of nanoclay on physiochemical, thermal and structural properties of urea formaldehyde resin (uf) was investigated. the prepared gluf resin was mixed mechanically with the 0.5, 1 and 1.5% nanoclay for 5 min at room temperature. the physicochemical properties of the prepared resins were measured according to standard methods. also, the thermal and structural changes i...

in this study, the possibility of using canola stem residues for particleboard manufacturing was studied. the ratio of canola straw to the industrial particles was as 25:50, 50:50, 75:25 and 100:00 percents, respectively. urea formaldehyde resin was used as binder at three levels of 8, 10 and 12 percent based on oven dried weight of particles and the press time was at three level of 5, 6 and 7 ...

1 Department of Furniture and Decoration Education, Dumlupinar University, 43500 Simav-Kutahya, Turkey. 2 Department of Furniture and Decoration, Giresun University, Giresun Vocational School, 28048, Giresun-Turkey. 3 Department of Furniture and Decoration, Artvin Coruh University, Artvin Vocational School, 08000, Artvin-Turkey. 4 Department of Forest Industrial Engineering, Artvin Coruh Univer...

Six potentially important wood adhesives for gluing southern pine and white oak flakeboards were evaluated for their perfonnances in steam-injection pressing and conventional platen pressing. Of the six resins tested, polyisocyanate resin perfonned well in both steam injection and conventional platen pressings. Phenol-fonnaldehyde (PF) and melamine urea-fonnaldehyde (MUF) resins perfonned poorl...