In this paper, a compression-to-tensile load converter device is developed to determine the anisotropic tensile strength of brittle material. A cubic sample with an internal pore was used as the test specimen, and a series of finite element analysis and DDM simulations were performed thereafter to analyse the effect of pore dimensions on the stress concentration, as well as to render a suitable...

We evaluated the strength and durability characteristics of latex-polymer-modified, pre-packed pavement repair concrete (LMPPRC) with a rapid-set binder. The rapid-set binder was a mixture of rapid-set cement and silica sand, where the fluidity was controlled using a latex polymer. The resulting mix exhibited a compressive strength of ¥21 MPa and a flexural strength of ¥3.5 MPa after 4 h of cur...

Xylan extracts from southern US hardwood were used for the adsorption of both hardwood and softwood pulp. Pulp beatability and physical strength properties were determined and compared with those of the conventional Kraft pulp and pre-extracted modified Kraft pulp. The results indicated that hemicelluloses adsorption greatly improved pulp beatability. Compared to conventional Kraft pulp, a sign...

In this study, age hardenable material Aluminum alloy Al-7075-T6 (aged) was investigated for weldability. Al-7075-T6 plates were subjected to Al-7075-0 heat treatment and were joined with different welding parameters by means of friction stir welding method. After Joining, the parts which were subjected to tensile and bending tests were examined. As a result of the studies, it was observed that...

This paper presents the results of an experimental study on the effect of limestone powder on the compressive strength, tensile behavior, and micromechanical parameters of a highly ductile cement composite incorporating limestone powder. Four mixtures were determined according to the replacement ratio of cement with limestone powder. A series of experiments including compressive strength, uniax...

The axial compressive strength of unidirectional FRP made by pultrusion is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. A theoretical iterative calculation approach was suggested to predict the ultimate axial compressive stress of the combined structure and analyze the influences of geometr...

Rubblization is an in-place rehabilitation technique that involves breaking the concrete pavement into pieces. This process results in a structurally sound, rut resistant base layer which prevents reflective cracking (by obliterating the existing concrete pavement distresses and joints) that can then be overlaid with Hot-Mix Asphalt (HMA). The design of the structural overlay thickness for rubb...

The aim of this study is to evaluate the moisture effect on the strength of concrete specimens that has completely cured. This study is also aimed to develop relations that can be used to determine the properties of concrete with different moisture contents that are normally experienced in outside conditions. Numerous compressions and split tensile tests are performed. In order to better unders...

This paper reports the results of an experimental investigation into the effects of incorporating varying amounts of expanded polystyrene beads on the engineering properties of high-strength concrete. It was observed that a density reduction of 8.3% caused compressive strength, tensile strength and modulus of elasticity to reduce by 48%, 39% and 15%, respectively. Drying shrinkage was marginall...

In the present study, two types of tests (tensile strength test and polymerization inhibition test) were performed to evaluate the physical and chemical properties of four impression materials [a polysulfide (Permlastic), a polyether (Impregum), a condensation silicone (Xantopren) and a polyvinylsiloxane (Aquasil)] when polymerized in contact with of one conventional (Hemostop) and two experime...