This study focuses on the effect of the amount of silica fume addition and volume fraction of steel fiber on the engineering properties of cementitious materials. Test variables include dosage of silica fume (5% and 10%), water/cement ratio (0.35 and 0.55) and steel fiber dosage (0.5%, 1.0% and 2.0%). The experimental results included: compressive strength, direct tensile strength, splitting te...

N-methylol compounds, such as dimethyloldihydroxyethyleneurea (DMDHEU), are the most commonly used durable press finishing agents for cotton fabrics by the industry. In this research, we have examined the effects of the catalyst systems used for DMDHEU on the mechanical strength of the crosslinked cotton fabric. The catalysts induce degradation of cellulose as indicated by the decrease in the t...

The tensile strength of water increases when solid particles are filtered out, and it becomes greater the smaller the remaining particles are. Natural particles are of random shape, making parametric studies on the relationship between tensile strength and particle characteristics difficult. In this investigation, using degased tap water from which natural particles larger than about 1 (m were ...

BACKGROUND Aim of the study was to verify the efficiency of Martens hardness measurements in detecting the degradation of composite resin cements during artificial aging. METHODS Four cements were used: Variolink II (VL2), RelyX Unicem 2 Automix (RUN), PermaFlo DC (PDC), and DuoCem (DCM). Specimens for Martens hardness measurements were light-cured and stored in water at 37 °C for 1 day to al...

The aim of this in vitro study was to compare the flexural, compressive and diametral tensile strengths of five cements used in orthodontics for band cementation. Twelve specimens of each cement were tested: 1 - GC Fuji Ortho Band (FJ), GC America Inc.; 2 - Meron (MR), Voco; 3 - Multi-Cure Glass Ionomer Band Cement (MC), 3M Unitek; 4 - Band-Lok (BL), Reliance Orthodontic Products; and 5 - Ketac...

Strut-and-tie model (STM) method evolved as one of the most useful designs for shear critical structures and discontinuity regions (D-regions). It provides widespread applications in the design of deep beams as recommended by many codes. The estimation of bottle-shaped strut dimensions, as a main constituent of STM, is essential in design calculations. The application of carbon fibre reinforced...

We performed molecular dynamics (MD) simulations to investigate the mechanical properties of polycrystalline graphene. By constructing molecular models of ultra-fine-grained graphene structures, we studied the effect of different grain sizes of 1-10 nm on the mechanical response of graphene. We found that the elastic modulus and tensile strength of polycrystalline graphene decrease with decreas...

Static and fatigue data available in literature concerning carbon fiber reinforced composite laminates subjected tension-tension fatigue were re-elaborated in the framework of a two-parameter fatigue model explicitly accounting for the cyclic as well as the mean stress. The data were used to obtain the model parameters by best fitting procedures. A primitive statistical implementation of the mo...

In this study, microalloyed steels were joined by using the submerged arc welding method at different welding currents of 350 A, 400 A and 450 A. The effects of selected welding parameters on the microstructure and mechanical properties of welded materials were investigated. Tensile tests and microhardness measurements were performed. Microstructural changes have been identified in the welding ...

Tensile and fatigue properties of as-rolled and annealed polycrystalline Cu foils with different thicknesses at micrometer scale are investigated. Uniaxial tensile testing shows that with decreasing foil thickness the uniform elongation decreases for both as-rolled and annealed foils, while the yield strength and ultimate tensile strength increase for as-rolled foils, but those decrease for the...