in this study, al/al2o3 composites with two different particle sizes of 1 µm and 0.3 µm were produced via accumulative roll bonding (arb). the microstructure evolution, mechanical properties and fracture behavior of the composites were investigated. results show that higher arb cycles are required to achieve a uniform distribution of particles in the composite with 0.3 µm particle size. during ...

Effect of artificial ageing temperature on the mechanical properties of Al-6Si-0.5Mg alloy containing 0.5 – 4 wt% Cu was studied. The solution treated alloys containing different amounts of Cu were aged isochronally for 1 hour at temperatures up to 300C. The precipitation stages during ageing were monitored by hardness measurements. Tensile and impact properties were determined by standard test...

In this study, 5052 Al–Mg alloy was pre-treated and friction stir processing (FSP) was then performed on the specimens to explore the deformation resistance. The experimental results indicate that the FSP specimens not only had better tensile properties but also better vibration fracture resistance. It is significant that the tensile elongation and deformation resistance tended to increase as t...

This work illustrates the effect of thermal mechanical processing parameters on the microstructure and mechanical properties of the Ti-22Al-25Nb alloy prepared by reactive sintering with element powders, consisting of O, B2 and Ti₃Al phases. Tensile and plane strain fracture toughness tests were carried out at room temperature to understand the mechanical behavior of the alloys and its correlat...

Perfect graphene is believed to be the strongest material. However, the useful strength of large-area graphene with engineering relevance is usually determined by its fracture toughness, rather than the intrinsic strength that governs a uniform breaking of atomic bonds in perfect graphene. To date, the fracture toughness of graphene has not been measured. Here we report an in situ tensile testi...

We find that the failure of bulk metallic glassy (BMG) materials follows three modes, i.e., shear fracture with a fracture plane significantly deviating from 45 degrees to the loading direction, normal tensile fracture with a fracture plane perpendicular to the loading direction, or distensile fracture in a break or splitting mode with a fracture plane parallel to the loading direction. The act...

It is difficult to conduct cyclic tensile fatigue tests for fine ceramics because of its high brittleness, and a little eccentricity of loading axis and gripping device gives inaccurate strength data. So, a major part of cyclic fatigue tests have been carried out under bending load conditions, for the allowance of misalignment of loading axis is generous to some extent in the case of bending fa...

this work is an attempt towards employing ductile damage criterion and finite elementsimulations for prediction of fracture initiation and evolution in deep drawing of copper/stainlesssteel clad sheets. the material mechanical properties and ductile damage parameters weredetermined through standard and notched tensile tests. the effect of some important processparameters on damage evolution wer...

A novel porous metal fiber/powder sintered composite sheet (PMFPSCS) is developed by sintering a mixture of a porous metal fiber sintered sheet (PMFSS) and copper powders with particles of a spherical shape. The characteristics of the PMFPSCS including its microstructure, sintering density and porosity are investigated. A uniaxial tensile test is carried out to study the tensile behaviors of th...

Diametral compression tests were performed on pultruded composite rods comprised of unidirectional glass or carbon fibers in a common matrix. During compression tests, acoustic emission (AE) activity was recorded and images were acquired from the sample for analysis by digital image correlation (DIC). In both composite systems, localized tensile strain developed in the transverse plane under th...