The paper presents the results of studies on the effect of the AlSi17Cu5 alloy overheating to atemperature of 920°C and modification with phosphorus (CuP10) on the resultingmechanical (HB, Rm, R0.2) and plastic (A5 and Z) properties. It has been shown that, so-called, "timethermal treatment" (TTT) of an alloy in the liquid state, consisting inoverheating the metal to about 250°C above T liq,hol...

ABSTRACT The isothermal cross section through the ternary phase diagram Nb-Ni-Cr at 1,100 °C was constructed by means of diffusion couples and equilibrated alloys. It was found that nearly 28 at.% of Cr can be dissolved in the μ phase (Nb7Ni6) at this temperature, and the solubility of chromium in NbNi3 is approximately 5 at.%. Under these circumstances the low-temperature (cubic) modification ...

The amount of pollutant gases in the atmosphere has reached a critical state due to an increase in industrial development and the rapid growth of automobile industries that use fossil fuels. The combustion of fossil fuels produces harmful gases such as carbon dioxide, nitrogen monoxide (NO), soot, particulate matter (PM), etc. The use of Dimethyl Ether (DME) biofuel in diesel engines or other c...

to enhance solubility and the performance of a plant gum (from south peach tree of china, sp gum) as a drilling fluid additive, we explored the potential of modified sp (msp) gum by modifying it with epichlorohydrin. the modification conditions, such as the mass ratio of  the crosslinking agent, ph and temperature, were optimized and the results show that 56.40 g/100g mass ratio of the crosslin...

Three mutants of Paramecium aurelia with genetic lesions at two unlinked loci lost their ability to generate action potentials when grown at high temperatures. Action potentials found at room temperature were slightly aberrant. Kinetics of phenotypic changes after temperature shifts showed that excitation is not immediately sensitive to temperature change in these mutants. The initiation of an ...

Studies on the durability and dimensional stability of a series of hardwoods and softwoods after thermal modification in vegetable oils and in steam atmospheres have been performed. Mass loss after exposure to Coniophora puteana (BAM Ebw.15) for 16 weeks was very low for European birch, European aspen, Norway spruce, and Scots pine thermally modified in a linseed oil product with preservative (...

A polarimetric fiber-optic vibration sensor immune to temperature variations is reali2ed by forming coils using a standard single-mode fiber. The phase drift due to the linear birefringence changes induced by a modification of the environmental temperature is balanced by a feedback compression of a non vibrating coil. Experimental results show that without the

An effective strategy to overcome the morphology evolution of hematite nanorods under high-temperature activation is presented, via tuning the crystallinity and sintering temperature by substrate modification. It is demonstrated that the as-prepared doping-free hematite nanorods with fine nanostructures obtain a significantly higher photocurrent density of 2.12 mA cm-2 at 1.23 V versus RHE, due...