In this paper, static indentation and low velocity impact responses of a fully backed composite sandwich plate subjected to a rigid flat-ended cylindrical indenter/impactor are analytically investigated. The analysis is nonlinear due to nonlinear strain-displacement relation. In contrast to the existed analytical models for the indentation of composite sandwich plates, the stacking sequence of ...

Creep response in a rotating disc made of anisotropic Al-SiC(particle) composite having linearly varying thickness has been carried out using anisotropic Hoffman yield criterion in present study. The steady state creep behavior is described by Sherby’s constitutive model. The material parameters characterizing difference in yield stresses have been used from the available experimental results i...

In this research, strain-sensing and damage-sensing functional properties of cement composites have been studied on a conventional reinforced concrete (RC) beam. Carbon nanofiber (CNFCC) and fiber (CFCC) cement composites were used as sensors on a 4 m long RC beam. Different casting conditions (in situ or attached), service location (under tension or compression) and electrical contacts (embedd...

OBJECTIVES To evaluate the shrinkage-strain, degree of conversion (DC) and percent filler of a range of flowable resin-composites. METHODS Several commercially available flowable resin-composites were selected. The bonded-disk technique was used to measure shrinkage-strain kinetics. Measurements were obtained continuously for 60min by irradiation for 40s at 750mW/cm(2) at two initial temperat...

The objective of the work was to investigate statistical analysis of fracture toughness of the glass fiber reinforced composites at different stacking sequences, strain rate and crack length. The glass reinforced vinylester composites prepared by hand layup technique with stacking sequences of 0/90, 45/-45 and chopped strand orientations. 3point bending for fracture toughness test for various n...

Microstructural observations and compressive property datasets of metal matrix syntactic foam core sandwich composite at quasi-static and high strain rate (HSR) conditions (525-845 s(-1)) are provided. The data supplied in this article includes sample preparation procedure prior to scanning electron and optical microscopy as well as the micrographs. The data used to construct the stress-strain ...

Steel-concrete-steel (SCS) sandwich panels are composed of two steel plates with low thicknesses and high densities and strengths and one thick layer between both plates with low strength and density known as core that is composed of concrete. Cohesive material-epoxy resin or shear connectors are usually used to connect the plates to the concrete core. SCS sandwich composites are being develope...

The numerical simulations of property of SiC/Al co-continuous composites under compression with ANSYS software were carried out. Based on the simulation results, deformational behavior and distribution of stress and strain fields were analyzed. The effects of compression speed for material property was studied. The results showed that Al matrix and SiC reinforcement exhibit different mechanical...

during the past two decades the use of lignocellouse fibers in reinforcing composites has attracted much research activities. in the present work, date palm fiber was used for production of composites compatible withliving environment. the fibers were pre-treated chemically to remove impurities. in order to verify and compare the effectiveness of the pretreatment methods, lignin, ash, moisture ...

Natural materials such as nacre, bone, collagen and spider silk boast unusual combinations of stiffness, strength and toughness. Behind this performance is a staggered microstructure, which consists of stiff and elongated inclusions embedded in a softer and more deformable matrix. The micromechanics of deformation and failure associated with this microstructure are now well understood at the "u...