In order to improve the oxidation resistance of ferritic stainless steel, it is possible to deposit a protective coating on steel substrate. In this research through the usage of pack cementation method a coating of titanium was applied on the surface of AISI 430 stainless steel. Scanning Electron-Microscopy (SEM), Energy- Dispersive X-ray spectrometry (EDAX) and X-ray diffraction (XRD) were us...

In spite of excellent corrosion resistance, good ductility and low cost of AISI 316 austenitic stainless steel, the low hardness and poor mechanical charecteristic of material restricts its applicability in several industrial services. To improve upon mechanical properties AlFeCuCrCoNi-WC10 high-entropy alloy coatings were deposited via laser cladding on austentic stainless steel AISI 316 subst...

In this work, changes undergone at the passive layer of a new type of corrugated austenitic stainless steel (low Ni, high Mn 204Cu type) when exposed to solutions simulating that contained in the pores of concrete have been studied. Changes in the nature of the passive layer have been characterized by X-ray photoelectronic spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Par...

The aim of this paper was to study the effects of die life through shot peening treatments on AISI H13 steel, and tests were performed to study the influential parameters of the shot peening process. To evaluate the effects of microstructure and the die life of AISI H13 steel after steel shot peening processes, we conducted and evaluated roughness tests, micro hardness and wear tests, and SEM m...

Blades usually become blunt as the blade tip suffers wear during cutting, and improving sharpness retention of steel blades has an attractive prospect in various industries. In this study, were fabricated from commercial high carbon martensitic stainless steels (154CM, 440C N690) with different contents alloying elements. 154CM higher Mo content demonstrated superior capability to N690, althoug...

In the present study, the effects of the boriding process on adhesion and tribological properties of AISI 310 steel were investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1123 and 1323K for 2 and 6 h. The boride layer was characterized by optical microscopy, the X-ray diffraction technique and the micro-Vickers hardness tester. The X-ray diffraction analy...

This paper presents a method to perform a surface finish control using a computer vision system. The goal pursued was to design an acceptance criterion for the control of surface roughness of steel parts, dividing them in those with low roughness acceptable class and those with high roughness defective class. We have used 143 images obtained from AISI 303 stainless steel machining. Images were ...

The aim of this research is to study the influence of explosive characteristics on the weld interfaces of stainless steel AISI 304L to low alloy steel 51CrV4 in a cylindrical configuration. The effect of ammonium nitrate-based emulsion, sensitized with different quantities and types of sensitizing agents (hollow glass microballoons or expanded polystyrene spheres) and Ammonium Nitrate Fuel Oil ...

This work aims at investigating experimentally fretting corrosion, that is, corrosion induced by friction of AISI 316L SS against poly(methyl methacrylate) under small displacements, and subsequently using the data to model wear. The observed wear on the stainless steel has been modeled using the Point Defect Model (PDM). The originality of this approach in applying the PDM to fretting corrosio...