Secondary-electron yields were investigated for 28-MeV protons, 126-MeV oxygen-ions, and 182-MeV gold ions incident on 304 stainless-steel surfaces. The dependence on the incidence angle was studied in detail, and a system was developed which allows accurate measurements to be performed over a wide angular range extending to nearly grazing collisions. Electron yield estimates of interest for fu...

Laser Engineered Net Shaping (LENSTM) is a rapid-manufacturing process that involves complex thermal, mechanical, and metallurgical interactions. Due to process input parameter such as laser power , laser scanning velocity and feed rate, the effect on solidification of component to be produced must be understand. The finite element method (FEM) may be used to accurately model this process and s...

This paper presents a solution to implement neutral argon plasma (NAP) in minimally invasive medical devices (MIMD) for therapy in endoscopy. The NAP system is composed by compressed inert gas (argon), two electrodes and a high-voltage source to ionize the argon. The miniaturization of an argon reservoir is required. The finite element method simulation of a small reservoir of 304 L stainless s...

High-frequency vibration aided EDM has become one of the ways to increase material removal rate in EDM process, due to the flushing effect caused by vibration. However, utilizing high-frequency vibration, especially in ultrasonic range consumes a lot of setup cost. This work presents an attempt to use a low-frequency vibration on workpiece of stainless steel (SS 304) during EDM process. The wor...

The in-process monitoring and real-time control of the penetration depth during laser welding is evaluated. An optical collimator collects the optical emission for measurement with a fast spectrometer. The sensor data are used to calculate the electron temperature and subsequently to determine the weld quality of overlap welds in AISI 304 stainless steel sheets performed both with CW Nd:YAG and...

Micro Electric Discharge Machining is a nontraditional machining process which can be used for drilling micro holes in high strength to weight ratio materials. This present research study deals with the single optimization of micro EDM process using Genetic Algorithm. Mathematical models using Response Surface Methodology (RSM) is used to correlate the response and the parameters. The desired r...

Complex two-component peak of anelastic mechanical losses was observed in multicomponent substitutional austenitic alloys after prior plastic deformation. In AISI 316L, AISI 316LN, AISI 310 and AISI 304 austenitic stainless steels, this peak is situated in the wide range of temperature from 200 to 400K. Characteristics of the observed peak for different thermo-mechanical treatments were studied...

In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...

The electrochemical and corrosion behavior of a stainless-steel-based alloy made as a prototype metallic nuclear wasteform to immobilize Tc, has been studied in a number of reference solutions ranging in pH from 4 to 10. The results showed the 47SS(304)-9Zr–23Mo prototype alloy contained at least five distinct phases with the majority of the Re, used as a Tc surrogate, contained within a Fe2Mo ...