OBJECTIVES The present study was conducted to evaluate the optimal method of enhancing the bond strength of a composite resin to the facial surface of the primary anterior stainless steel crowns using various surface treatments namely Nd: YAG laser surface treatment, sandblasting , alloy primer application and no surface treatment. STUDY DESIGN The study sample consisted of 60 primary anterio...

AIM To evaluate and compare the shear bond strength of resilient liners with heat cure denture base resins in the presence or absence of saliva. MATERIALS AND METHODS Two commercially available heat polymerized acrylics and three commercially available denture liners were immersed in artificial saliva for 7 days and 14 days, respectively. A total of 180 (Acralyn-H, No.90 and Lucitone - 199, N...

Little is known about the performance of Transbond Plus Self-Etching Primer (TPSEP), especially when used with Adhesive Precoated Brackets (APC 1 and APC 2). The aim of this study was to compare the shear bond and rebond strengths and failure sites of APC 1 and APC 2 with a non-coated bracket system [Victory Series (V)] using Transbond XT light-cured adhesive and TPSEP or 37 percent phosphoric ...

The aim of this investigation was to evaluate the effects of different tooth types on the shear bond strength (SBS) of two orthodontic resin adhesive systems in vitro. Two hundred extracted sound human teeth were used in the study. Ten teeth of each tooth type were the mounted in acrylic resin leaving the buccal surface of the crowns parallel to the base of the moulds. In each experimental grou...

AIM The aims of this study were to evaluate the prevention of enamel demineralization and the shear bond strength (SBS) of orthodontic brackets bonded with fluoride and no fluoride conventional and self-etching adhesives and to analyze the characteristics of enamel near the bond area using a polarized light microscope (PLM) following demineralization and remineralization cycling (Des Re). MET...

This study investigated fluoride release, acid resistance and shear bond strength (SBS) of new 4-META/MMA-TBB-based fluoride-containing resin adhesive (Super-Bond/F3). Super-Bond, Transbond Plus and Fuji Ortho LC were selected for comparison. Fluoride release into distilled water during 6-month period was measured using disk-shaped specimens. Brackets were bonded to human premolars with each ma...

OBJECTIVES This study evaluated the in vitro shear bond strength (SBS) of a resin-based pit-and-fissure sealant (Fluroshield [F], Dentsply/Caulk) associated with either an etch-and-rinse (Adper Single Bond 2 [SB], 3M/ESPE) or a two-step self-etch adhesive system (Adper SE Plus [SE], 3M/ESPE) on Er: YAG laser-irradiated enamel. MATERIALS AND METHODS Seventeen sound third molar crowns were embe...

The aim of this in vitro study was to investigate both shear bond strength (SBS) by shear testing of indirectly bonded brackets, and the accuracy of a new transfer method, the Aptus bonding device (ABD). For comparison, the SBS of directly bonded brackets in two experimental arrangements was also measured. The precision of the positioning of the indirect bracket transfer was assessed by photogr...

Background and Aim: High chipping rates of the veneering porcelain in zirconia ce-ramic restorations have been reported in many clinical studies. However, information on the bonding behavior of veneering porcelain to zirconia and lithium disilicate frameworks is limited. The purpose of this study was to evaluate the bond-ing strength of porcelain veneering to zirconia, lithium disilicate, nicke...

statement of the problem: porcelain may fracture or chip if exposed to any traumas and can be repaired by using a resin composite. purpose: this study was aimed to evaluate the influences of er:yag laser on shear bond strength (sbs) of resin composite to feldspathic porcelain. materials and method: seventy-two porcelain blocks were divided into six groups (n=12): g1: no treatment (control group...