Abstract In this study, the effects of mould materials on microstructure and mechanical properties of cast A356 Al alloy were investigated. The alloy was poured into three different moulds. Then the samples were homogenised and applied T6 heat treatment. The optical, Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) studies were made. Secondary dendrite arm spacing (SD...

introduction: this study investigated the fatigue and fracture modes of race and protaper rotary instruments. materials & methods: fatigue resistance was evaluated by rotating the files 30 ° or 60 ° and with 2 or 5mm radius of curvature. race taper 06 size 25 and protaper f1 files (n=40) were used. the number of rotations to failure was analyzed by two-way anova and independent sample     t-tes...

Mechanical properties of dissimilar weld joints between GOST09ch16N4B (a martensitic stainless steel) and AISI 4130 thin sheets made by gas tungsten arc welding (GTAW) were studied using ER410NiMo and ER100S-G filler metals in post weld heat treated conditions. Heat treatment cycles consisted of austenitization at 900, 950 and 1000 °C for 1 h and this was followed by oil cooling and tempering a...

The present study investigates the feasibility of utilizing polylactic acid (PLA) and PLA-based natural fiber-reinforced composites (NFRCs) in mechanical recycling. A conical twin screw extrusion (CTSE) process was utilized to recycle PLA NFRCs consisting 90 wt.% a 10 proportion either basalt fibers (BFs) or halloysite nanotubes (HNTs) for up six recycling steps. recycled material then injectio...

the microstructure of hp stainless steel in aged and aged + solution annealed conditions and solutionized alloy 800 was characterized by optical microscopy, scanning electron microscopy (sem), and transmission electron microscopy (tem) equipped by eds. all phases present in the above condition were described. the effects of solution annealing heat treatment temperature on the microstructure, te...

This research studied the application of the response surface methodology (RSM) and central composite design (CCD) experiment in mathematical model and optimizes postweld heat treatment (PWHT). The material of study is a pressure vessel steel ASTM A516 grade 70 that is used for gas metal arc welding. PWHT parameters examined in this study included PWHT temperatures and time. The resulting mater...

PLA biocomposites were prepared using three corn cob fractions and a wood fiber as reference. The composites were characterized by tensile testing, scanning electron microscopy (SEM) and polarization optical microscopy (POM). Micromechanical deformation processes were followed by acoustic emission measurements. The different strength of the components was proved by direct measurements. Two cons...

combining antimicrobial agents directly into a food packaging is a form of active packaging. in this study chitosan-based edible films containing thyme and cinnamon essential oils at 0.5%, 1%, and 1.5% v/v were prepared to examine their antibacterial, physical and mechanical properties. scanning electron microscopy was carried out to explain structure-property relationships. films were more eff...

Microwave dyeing was carried out under a variety of conditions in terms of the power and time of a microwave to investigate the effects of microwaving on the dyeability of acrylic fibers. It was found that the dyeability of acrylic fibers were significantly improved under microwave irradiation caused by the increased adsorption of the dye into fibers due to the local over heating and an amplifi...

This paper presents the outcomes from an extensive investigation on the structure and geometry of single hemp fibres, as well as configurations and related tensile strength (TS) of hemp fibres, with the aid of field emission scanning and optical microscopy. The results showed that 1) the TS increased with the decrease of the diameter of individual test pieces, due possibly to the stacks of mult...