The purpose of this study was to confirm the dimensional accuracy of a newly developed injection pressing method for resin polymerization by making use of the internal electric resistance of resin to determine the optimal timing for resin injection. A new injection pressing polymerization pot with a built-in system to measure the internal electric resistance of resin was used for resin polymeri...

Phosphogypsum waste is a potential, secondary rare earth element (REE) source that available in very large volumes. Extraction and purification of REE from this complex was studied using resin-in-leach (RIL) followed by batch elution. Multiple consecutive RIL cycles with Purolite S940 resin dilute H2SO4 solution were performed for an industrial phosphogypsum waste. loading (max. 0.92 equiv./kg)...

The penetration coefficients (PC) and tensile bond strengths of two pit and fissure sealants and a low viscosity bonding resin were evaluated. The penetration coeftYcients of the resin systems were determined at 22°C. Five determinations were done with each resin. Bonded test specimens were loaded to failure in the tensile mode in an Instron testing macl~’ne. Ten specimens were prepared with ea...

The purpose of this study was to assess the color of layered resin overlays and to test the early microhardness of dual cure resin cement (DCRC) light cured through the layered resin overlays. Resin overlays of 1.5 mm thickness were fabricated with the A3 shade of Z350 (Group 1L), the A3B and A3E shades of Supreme XT (Group 2L), and the A3, E3, and T1 shades of Sinfony (Group 3L) using one, two...

The purpose of this study was to evaluate the effect of degradation of a denture base resin on bond strength to relining resins. Denture base resin specimens were immersed under various conditions to simulate degradation. Tensile bond strength of denture base resin after immersion to relining resins was measured with or without surface grinding. The bond strength of denture base resin without g...

The relationships between the transmission coefficient and the cure depth were evaluated on eight commercially available light-activated resin composites. The determination of transmission coefficient was carried out by the use of a radiometer for various shades of the resin composites. The transmission coefficient, ranging from 0.042 to 0.263, wasdependent upon the shade of the resin. There wa...

A chitosan resin derivatized with 3,4-dihydroxybenzoic acid moiety (CCTS-DHBA resin) was newly synthesized for the collection/concentration of trace uranium by using cross-linked chitosan (CCTS) as base material, and the adsorption behavior of uranium as well as 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution o...

http://dx.doi.org/10.1016/j.anbehav.2014.04.024 0003-3472/ 2014 The Association for the Study of A Social insects use multiple lines of collective defences to combat pathogens. One example of a behavioural group defence is the use of antimicrobial plant compounds to disinfect the nest. Indeed, wood ants collect coniferous tree resin, and the presence of resin in their nest protects them against...

PURPOSE The aim of this study was to compare the color stability, water sorption and cytotoxicity of thermoplastic acrylic resin for the non-metal clasp dentures to those of thermoplastic polyamide and conventional heat-polymerized denture base resins. MATERIALS AND METHODS Three types of denture base resin, which are conventional heat-polymerized acrylic resin (Paladent 20), thermoplastic po...

...................................................................................................................... iii ACKNOWLEDGMENTS ................................................................................................. iv TABLE OF CONTENTS .................................................................................................... v INTRODUCTION ..........................