The aim of this paper is to present results of testing a full scale reinforced concrete T connection by static loading. The connection represents a beam-column connection. The beam and column had a square cross section with a 300 mm dimension. The height of the column was 2.9 m and the clear beam length was 1.4 m. The connection was initially tested to failure. Galvanised steel straps were used...

In this paper, a new combined form of Glass Fiber Reinforced Plastic (GFRP) column and steel fiber mortar reinforced damaged Concrete (RC) is proposed. With the help ABAQUS finite element software, model GFRP tube RC established. Based on experiment strengthening column, parameters such as winding angle tube, strength section loading mode are studied by numerical simulation. The results show th...

In this paper, a new type of steel-concrete composite member, concrete-filled core steel tube with outer angle steel plank reinforced concrete stub column, is proposed and a series of nonlinear 3D(three-dimensional) full-range numerical calculations under axial compression are carried out, some important factors are analyzed, such as the strength of the concrete, the steel tube and the angle st...

To investigate seismic performance of beam-column knee joints, four full-scale reinforced concrete beam-column knee joints, which were fabricated to simulate those in as-built RC frame buildings designed to ACI 318-14 and ACI-ASCE 352R-02, were tested under reversed cyclic loading. In the experimental programme, particular emphasis was given to the effect of horizontal reinforcement (in format ...

A research study was undertaken to assess performance of flat plate systems constructed with slab shear reinforcement under dynamic loads. The research program consisted of shake table tests and accompanying analytical studies of two, approximately one-third scale, two-story, two-bay, slab-column frames. One specimen was constructed with reinforced concrete (RC) slab, whereas the other specimen...