The metals for porcelain fusing used in this study were gold alloys and nickel-chromium alloys. Chromatic characteristics were compared between samples of 0.1, 0.2 and 0.3 mm thickness. The dentin porcelain was fused on the opaque surface. Chromatic analyses were then carried out at each stage of 0.1 mm-incremental reductions of the dentin thickness starting from 0.5 mm. In conclusion, the meta...

The Ni60Nb15Ti15Zr10 glassy alloy was developed as a separator material for a proton exchange membrane fuel cell (PEMFC). The corrosion rate of the glassy alloy in sulfuric acid was approximately 3 digits lower than SUS316L. A precise groove forming of the glassy alloy can be achieved by hot-pressing in the supercooled liquid state. The result of the power generation test of the single cell ass...

The dilute bismide semiconductor GaAs1-xBix represents an interesting counterpart of the dilute nitride alloy GaAs1-xNx. Both exhibit giant bandgap bowing phenomena but with oppositely directed effects on the valence and conduction bands respectively. The optical properties of the dilute bismide alloy will be contrasted with those of the dilute nitride and the similarities and distinctions betw...

Using atomically and momentum resolved scanning tunneling microscopy and spectroscopy, we demonstrate that a two-dimensional (2D) √3 × √3 semiconducting Ga-Si single atomic alloy layer exhibits an electronic structure with atomic localization and which is different at the Si and Ga atom sites. No indication of an interaction or an electronic intermixing and formation of a new alloy band structu...

A specific colorimetric DNA detection method based on oligonucleotide functionalized gold-silver-alloy nanoparticles (AuAg-alloy-nanoprobes) is presented. The AuAg-alloy-nanoprobes were then used for the specific detection of a DNA sequence from TP53-a gene involved in cancer development. The AuAg-alloy-nanoprobes were then used in combination with Au-nanoprobes for a one-pot dual-colour detect...

The microstructure of Sn–8Zn–3Bi alloy was refined by increasing the solidification rate and the correlation between Zn-rich phase and the corrosion/oxidation behavior of the alloy was investigated. The Zn-rich phase transforms from coarse flakes to fine needles dispersed in the β-Sn matrix with the increase of the cooling rate. The transformation of Zn-rich precipitates enhances the anticorros...

Glassy Pd85 xCuxSi10P5 (x 1⁄4 5{12 at%) alloys with a supercooled liquid region ( Tx) of 51–73K were synthesized despite the low metalloid content. The glassy Pd79Cu6Si10P5 alloy exhibits the largest Tx of 73K in the present alloy system and its critical diameter for glass formation reaches 5mm by copper mold casting. For the bulk glassy Pd79Cu6Si10P5 alloy, the Young’s modulus, compressive yie...

Kodkod, the backend of Alloy4, incorporates new features for solving models where part of the solution, that is, a partial instance, is already known. Although Kodkod has had this functionality for some time, it is not explicitly available to the modeller through the Alloy language syntax. We propose an extension to the Alloy language to make partial instances explicitly available to the Alloy ...

The fatigue strength, effects of a notch on the fatigue strength, and fatigue crack growth rate of Ti-15Zr-4Nb-4Ta alloy were compared with those of other implantable metals. Zr, Nb, and Ta are important alloying elements for Ti alloys for attaining superior long-term corrosion resistance and biocompatibility. The highly biocompatible Ti-15Zr-4Nb-4Ta alloy exhibited an excellent balance between...

In this study, the pitting corrosion susceptibility and its role on the hydrogen embrittlement behavior of AZ80 magnesium alloy were studied using slow strain rate testing (SSRT), electrochemical technique and immersion test method. The electrochemical and immersion tests in chloride-containing solution revealed severe pitting corrosion in the alloy. The SSRT results of the alloy under continuo...