In addition to lower emissions warm mix asphalt has several advantages over hot mix asphalt such as fuel energy savings, decreased binder aging and an extended paving season (Photo courtesy: Matthew Corrigan, FHWA) The National Center for Asphalt Technology (NCAT) is evaluating warm mix asphalt (WMA) technologies. WMA technology allows the mixing, lay down, and compaction of asphalt mixes at si...

Asphalt pavement itself is a mixture made up of mainly aggregates, binders, and fillers that acts as a composition used for pavement construction. An experimental program was setup to determine the fatigue performance test of Asphalt with three different grades of conventional binders. Asphalt specimen has achieved the maximum optimum bulk density and air voids with a consistent bulk density of...

Conventional asphalt binder derived from the petroleum refining process is widely used in pavement engineering. However, asphalt binder is a non-renewable material. Therefore, the use of a co-production of renewable bio-oil as a modifier for petroleum asphalt has recently been getting more attention in the pavement field due to its renewability and its optimization for conventional petroleum-ba...

Adhesion between asphalt and aggregate plays an important role in the performance of asphalt mixtures. A low-frequency adhesion fatigue test was proposed in this paper to study the effect of environment on the asphalt-aggregate adhesion system. The stress-based fatigue model had been utilized to describe the fatigue behavior of thin-film asphalt and aggregate system. The factors influencing the...

Asphalt pavements undergo long-term aging due to oxidation of the asphalt binder. As a pavement oxidizes, it stiffens and eventually cracks. The use of an antioxidant in an asphalt binder could retard aging, thus increasing the pavement’s service life. Lignin is a known antioxidant and is highly available from timber and many agricultural products. A wet-mill ethanol process produces several co...

Based on the analysis of the mechanism and hazards of asphalt fume, by adding two fume suppressant Mg(OH)2 and Al(OH)3 and two viscosity reducers Sasobit and ROADBIT-BPL, the paper optimized the mixture ratio for road use, and prepared the environment-friendly fume-suppression asphalt, and then conducted the performance tests to identify the optimum dosage. The results show that: the fume amoun...