The atlanto-occipital (AO) overlap in combination with atlanto-axial (AA) instability was found in a dog. We hypothesized that ventral fixation of the AA junction can stabilize the atlas and prevent AO overlap by reviewing our past cases with AA instability. A standard ventral fixation of the AA junction using stainless k-wires and polymethyl methacrylate (PMMA) was performed. The dog fully rec...

Based on a vector wave theory of volume holograms, dependence of holographic reconstruction on the polarization states of the writing and reading beams is discussed. It is found that under paraxial approximation the circular polarization holograms provide a better distinction of the reading beams. Characteristics of recording polarization holograms in thick phenanthrenequinone-doped poly(methyl...

We aimed to determine the optimal method of inserting a screw into polymethylmethacrylate (PMMA) cement to enhance fixation. We performed six groups of ten axial pull-out tests with two sizes of screw (3.5 and 4.5 mm AO cortical) and three methods of insertion. Screws were placed into 'fluid' PMMA, into 'solid' PMMA by drilling and tapping, or into 'curing' PMMA with quarter-revolution turns ev...

Bone cements are extensively employed in orthopaedics for joint arthroplasty, however implant failure in the form of aseptic loosening is known to occur after long-term use. The exact mechanism causing this is not well understood, however it is thought to arise from a combination of fatigue and chemical degradation resulting from the hostile in vivo environment. In this study, two commercial bo...

Polymethyl methacrylate (PMMA) is one of the most popular synthetic polymers in aircraft windshields as an alternative to glass, due to its lightweight, high transparency and impact-resistant characteristics. The erosion behavior of PMMA is critical when used as an alternative to glass in an aircraft windshield. This paper presents experimental data on the effects of particle size, velocity and...

[This corrects the article on p. 396 in vol. 35.].

The output colour distributions from red, green and blue (RGB) LEDs mixed with cross linked PMMA micro particle doped PMMA mixing rods is compared to output from a plain PMMA mixing rod. Distinctive patterns with clear colour separation result with the undoped rod. These are homogenised by our mixers, resulting in white light. Light output has been photographed, measured and computer simulated ...

Objectives The purpose of this experimental study was to discover a method to increase the strength of repaired polymethyl methacrylate (PMMA) samples. Materials and Methods In this experimental study, 40 specimens with the dimensions of 65×10×2.5mm3 were fabricated using heat-curing acrylic resin. Sixteen specimens were repaired with fiberglass and self-curing PMMA, while 16 samples were rep...