Hyperstructured Organic Materials Research Center, Department of Chemical Engineering, Sogang University, Seoul 121-742, Korea Samsung SDI Company, Limited, Energy Development Team, Corporate Research and Development Center, Yongin-City, Kyonggi-Do 449-742, Korea Battery and Fuel Cell Research Center, Korea Institute of Science and Technology, Seoul 130-650, Korea Center for Electrochemical Eng...

Polymer gels are found in many applications ranging from foods (Ross-Murphy, 1995; Tunick, 2010) and drug delivery (Andrews & Jones, 2006) to adhesives (Creton, 2003) and consumer products (Solomon & Spicer, 2010). By manipulating the gel’s microstructure, a wide variety of physical properties can be achieved ranging from hard rubbery plastics to soft hydrogels. Silicone-based polymer gels in p...

Introduction: The conventional methods of dosimetry are not capable of dosimetry in such a small volume of less than one cubic millimeter. Although the polymer gel dosimetry method based on magnetic resonance imaging (MRI) could achieve three dimensional dosimetry with high resolution, a spatial resolution evaluation based on gel dose modulation transfer function has not been investigated yet. ...

The surfactant-polymer-based (S/P) fracturing fluid combines the advantages of surfactant-based and polymer-based fluids. In this study, synergistic tackifying cationic surfactants carboxymethyl hydroxyethyl cellulose potential application in hydraulic was investigated. Firstly, cetyltrimethylammonium chloride (CTAC) salicylic acid (SA) with a weight ratio 4:1 were optimized as main agent small...

There is a need for stable gel materials for phantoms used to validate optical computerized tomography (CT) scanners used in conjunction with radiation-induced polymerizing gel dosimeters. Phantoms based on addition of light-absorbing dyes to gelatine to simulate gel dosimeters have been employed. However, to more accurately simulate polymerizing gels one requires phantoms that employ light-sca...

This study extends the 'zero scan' method for CT imaging of polymer gel dosimeters to include multislice acquisitions. Multislice CT images consisting of 24 slices of 1.2 mm thickness were acquired of an irradiated polymer gel dosimeter and processed with the zero scan technique. The results demonstrate that zero scan-based gel readout can be successfully applied to generate a three-dimensional...

Changes in the linear attenuation coefficient of polymer gel dosimeters post-irradiation enable the imaging of dose distributions by x-ray computed tomography (CT). Various compositions of polymer gel dosimeters manufactured from acrylamide (AA), and N,N'-methylene-bis-acrylamide (BIS) comonomers and gelatin or agarose gelling agents were investigated. This work shows that increasing the comono...

background:  in this study a series of basic dosimetric properties of a low-density (ld) gel dosimeter are investigated. the dose response is studied regarding to linearity, sensitivity, dose-rate and energy dependence as well as lung tissue equivalence. materials and methods: the ld gel was made by mixing the polymer gel with expanded polystyrene spheres. energy dependence was studied at two d...

A composite gel composed of a water-soluble aromatic polyamide hydrogelator and the nanosheet Laponite®, a synthetic layered silicate, was produced and found to exhibit thixotropic behaviour. Whereas the composite gel contains the gelator at the same concentration as the molecular gel made by the gelator only, the composite gel becomes a softer thixotropic gel compared to the molecular gel made...

Introduction Polymer gel dosimeters offer a practical solution to 3D dose verification for conventional radiotherapy as well as intensity-modulated and stereotactic radiotherapy. In this study, EGSnrc calculated and PAGAT polymer gel dosimeter measured dose profiles from single shot irradiation with 18 mm collimator of Gamma Knife in homogeneous and inhomogeneous phantoms were compared with eac...