نتایج جستجو برای: nitrogen isotherm data
تعداد نتایج: 2517448 فیلتر نتایج به سال:
in this study adsorption of 1-chloro-4-nitrobenzene (cnb) from aqueous solutions onto multi-walled carbon nanotubes (mwcnts) was surveyed. the effect of some key parameters such as ph (2-10), carbon nanotubes dosage (0.02-0.1 mg/250ml), cnb concentration (2- 16 mg/l), and temperature (20,30,40,50°c) were investigated. the results showed that, the variation of initial ph and cnb concentration ex...
The present study reports the kinetic and absorption performance of novel nanometre scale hydroxyapatite (HAP) absorber synthesised from a combined ultrasound and microwave based technique for the removal of metal ions (Fe, Cu and Zn) from aqueous solutions. After powder characterisation was carried out using XRD, SEM, EDS and FT-IR, batch adsorption studies were carried out. Kinetic studies es...
In this study, the Langmuir adsorption isotherm has been coupled with activity coefficient models for prediction of surface tension of single and mixed electrolyte solutions. Various activity models such as Meissner, Pitzer and extended UNIQUAC have been used and coupled with Langmuir adsorption isotherm. The model parameters were determined through mathematical optimization using experimental ...
Using grand canonical Monte Carlo simulation we show, for the first time, the influence of the carbon porosity and surface oxidation on the parameters of the Dubinin-Astakhov (DA) adsorption isotherm equation. We conclude that upon carbon surface oxidation, the adsorption decreases for all carbons studied. Moreover, the parameters of the DA model depend on the number of surface oxygen groups. T...
This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...
Fruits and citrus wastes are generated in the food industry in large quantities. Their management in Iran, as one of the major hubs of fruits and citrus production, is of great importance. In this study, the biochar samples were prepared from pomegranate, orange and lemon peel waste produced in a juice factory using the pyrolysis process in the range of 400-500 °C; then their efficiency for zin...
In this paper, the ability of coconut bunch waste (CBW), an agricultural waste available in large quantity in Malaysia, to remove basic dye (methylene blue) from aqueous solution by adsorption was studied. Batch mode experiments were conducted at 30 degrees C to study the effects of pH and initial concentration of methylene blue (MB). Equilibrium adsorption isotherms and kinetics were investiga...
Ethyl benzene used increasingly each year is the raw material of producing styrene monomer. This substanceis produced from benzene alkylation with ethylene or ethanol, depending on the availability and cost of rawmaterials. In this study benzene alkylation in the presence of ethanol in a catalytic fixed bed reactor inthree states of isotherm, adiabatic and non-isotherm-non-adiabatic is mathemat...
[1] Seinfeld JH. Air pollution: physical and chemical fundamentals. New York: McGraw Hill; 1975. p. 1–26. [2] Arthur CS. In: Measuring, monitoring, and surveillance of air pollution, vol. 3. New York: Academic Press; 1976. p. 183–305. [3] Tseng HH, Wey MY, Liang YS, Chen KH. Catalytic removal of SO2, NO and HCl from incineration flue gas over activated carbonsupported metal oxides. Carbon 2003;...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید