A series of silica nano-particles with different size were prepared by sol–gel technique, then surface modification by using cyclic carbonate functional organoalkoxysilane (CPS) was performed. Various amounts of carbonated silica particles directly added into carbonated soybean oil (CSBO) and carbonated polypropylene glycol (CPPG) resin mixture to prepare polyurethane–silica nanocomposite coati...

This work reports on the nanoscale assembly of hybrid lanthanum oxide and silica structures, which form patterns of interfacial dense and porous networks. It was found that increasing the molar ratio of lanthanum nitrate to tetraethyl orthosilicate (TEOS) in an acid catalysed sol-gel process alters the expected microporous metal oxide silica structure to a predominantly mesoporous structure abo...

Investigation of the effect of using nanomaterials for improving and Stabilizing the gypseous soil was carried out using laboratory works. The gypseous soils were collected from a site of intake in Bahar Al-Najaf and mixed with two types of nanomaterials (Nano-silica and, Nano-clay) where the nanomaterials were added in small amounts as a percent of the dry weight of the soil sample. Tests to d...

Transparent silica glass is widely used in various fields. However, a simple and economical method of synthesis remains to be developed for high-precision device manufacturing. In this study, transparent fabricated from low-cost commercial nano-silica hydrosol. To obtain glass, the crystallization temperature bulk materials must higher than their densification temperature. Based on XRD analysis...

various concentrations of copper were embedded into silica matrix to xerogel forms using copper source cu(no3)2∙3h2o. the xerogel samples were prepared by hydrolysis and condensation of tetraethyl ortho-silicate (teos) with determination of new molar ratio of the components by the sol-gel method. after ambient drying, the xerogel samples were heated from 60 to 1000˚c at a slow heating rate (50°...

liquefaction is one of the most important and complex topics in geotechnical earthquake engineering. in recent years, passive site stabilization method has been proposed for non-disruptive mitigation of liquefaction risk at developed sites susceptible to liquefaction using colloidal nano-silica stabilizer. in this research, 4 box models were used to investigate the ability to uniformly deliver ...

A research program was carried out to evaluate the chloride ion permeability of both air and non-air entrained concretes made with mineral admixtures as partial replacements of cement. Two series of investigations (Series 1 and Series 2) were carried out. The mixtures were proportioned to have 28-day strengths of 35 MPa for Series 1 and 69 MPa for Series 2. Chloride ion permeability was determi...

In recent years, using Sol-gel procedure for the purpose of laboratory and industrial synthesis of Nano-structures, and especially silica Nano-particles, has been significantly increased. In this research, silica particles were synthesized by Sol-gel procedure and their physical and chemical properties were studied by means of scanning electron microscopy (SEM), transmission electron microscopy...

Corrosion of steel is one of the most important potential dangers and threats in concrete structures. Corrosion of steel embedded in reinforced concrete plays a key role in reducing the strength and durability of reinforced concrete. Several studies have proposed that alternative approaches to enhancing the performance of reinforced concrete and its resistance to corrosion. In this study, the r...