Cementless acetabular components are associated with a significant incidence of polyethylene wear and secondary osteolysis. 3-dimentional (3-D) porous coating and enhanced shell to a liner fixation are expected to reduce the polyethylene wear and to increase the longevity of an acetabular cup. The authors report the early clinical outcome with a cementless acetabular cup, Regenerex Ringloc+ (Zi...

BACKGROUND AND PURPOSE There have been few reports documenting the wear and oxidation performance of the polyethylene bearing surface of HGPI and HGPII THA devices. We evaluated retrieved HGPI and HGPII acetabular liners that had been in situ for more than 10 years and determined whether there was a relationship between clinical and radiographic factors, surface damage, wear, and oxidation. M...

Aiming at predicting what happens in reality inside mills, the contact parameters of iron ore particles for discrete element method (DEM) simulations should be determined accurately. To allow the irregular shape to be accurately determined, the sphere clump method was employed in modelling the particle shape. The inter-particle contact parameters were systematically altered whilst the contact p...

The aim of this study was to compare the 10-year survival rate, pelvic osteolysis frequency and linear head penetration rate of the Hexloc and Ringloc liners used together with a partially threaded porous and hydroxyapatite coated cup and the Bi-Metric uncemented femoral stem. The 15-year results for the cup with the Hexloc liner are also reported. We included 332 consecutive hips (166 Hexloc a...

due to availability of proper materials in landfills (at most parts of iran especially in kahrizak) and also less expenditure of this liner in comparison with other liners it can be count as an acceptable choice. different studies imply that one of the most important factors for soil liner selection is local conditions and also liner compatibility with generated leachate in studied site. hydrau...

There is currently considerable interest in the use of highly cross-linked polyethylene (XLPE) acetabular liners for total hip arthroplasty (THA). In literature, only a single retrieval analysis of one type of XLPE liner implanted for greater than four years exists. The purpose of the present report is to quantify surface deviations in two XLPE liners implanted during revision THA and retrieved...

In this study, injection molding process of ultrahigh molecular weight polyethylene (UHMWPE) reinforced with nano-hydroxyapatite (nHA) was simulated and optimized through minimizing the shrinkage and warpage of the hip liners as an essential part of a hip prosthesis. Fractional factorial design (FFD) was applied to the design of the experiment, modeling, and optimizing the shrinkage and warpage...

In this paper, a study on the vibration of thin cylindrical shells made of a functionally gradient material (FGM) composed of stainless steel and nickel is presented. The effects of the FGM configuration are taken into account by studying the frequencies of two FG cylindrical shells. Type I FG cylindrical shell has nickel on its inner surface and stainless steel on its outer surface and Type II...

This paper focuses on an experimental study of the explosive decompression representative samples hyperbaric type IV hydrogen storage vessels. The adhesion composite to liner is achieved by different adhesives. bond behavior liner-to-composite bonded joint considerably depends properties adhesives, as well assembly process. X-ray tomography allows determining damages before and after tests. Tom...

This study investigated the C. albicans adhesion to cold- and heat-polymerized soft lining materials that were initially incubated in two different artificial body fluids, namely saliva and nasal secretion, and examined the surface roughness the materials (cold and heat polymerized soft liner) tested in vitro. Cold (Visco Gel) and heat-polymerized (Molloplast B) soft liner specimens (N=32, n=8 ...