In the present study, vibration of cylindrical laminates with different layers and angles were studied. In order to actuate and polarize in radial direction, a piezoelectric layer was located at outer surface of composite shell. Laminates were assumed long enough so that plane strain state analysis in 2D can be used properly. In order to satisfy the boundary conditions, variables in terms of Fo...

In this article, the effect of hygrothermal aging on mechanical properties of fiber metal laminates (FMLs) and E-glass/epoxy (GE) composites is investigated. First, FML and GE specimens were built using wet lay-up technique under vacuum pressure. Hygrothermal aging simulation was then carried out on both specimen types in distilled water at a constant temperature of 90 °C for 5 weeks. The resul...

Carbon fiber composites are of significant interest for use in deployable space structures. Elastically folded thin laminates can be utilized as hinge mechanisms in structural systems such as solar arrays, reflectors, and instrument booms, allowing for compact packaging during launch to orbit. While the initiative to utilize composite laminates in deployable structures has increased it also has...

TIlls paper describes the design and manufacture of a multifunctional space structure. The analytical techniques used in this project included thermal analyses of structures in various earth orbits, determination of structural requirements from optical performance calculations, designing of near zero Coefficient of Thermal Expansion (CTE) laminates, consideration of manufacturing and material v...

The objective of this research was to investigate esponse of repeated low velocity impact tests on glass fibre/ epoxy-Al metal laminates (GEAML) and carbon fibre/ epoxy-Al metal laminates (CEAML) at the same location using drop-weight tester. CEAML, GEAML as well as monolithic Al panels of the same thickness were impacted repeatedly up to four impacts. The effect of repeated impacts on specimen...

A conductive laminate consisting of stacked two-dimensional plain-weave screen with an arbitrary weave angle is described. Similar to orthogonal screen laminates, these porous matrices can be fabricated to have a wide range of porosity, ε and specific surface area, ß; and the structure can have a highly anisotropic thermal conductivity vector, with in -plane effective thermal conductivities ran...

Abstract Low mechanical resistance and high weight restrict use of natural stones in applications where tensile or flexural capacity is required together with a low weight, such as for long spans or thin sections (e.g., cladding, countertops, desktops). The use of composite laminates as external reinforcement both to increase the mechanical resistance and to decrease weight of natural stone is ...

Successful engineering of load-bearing tissues requires recapitulation of their complex mechanical functions. Given the intimate relationship between function and form, biomimetic materials that replicate anatomic form are of great interest for tissue engineering applications. However, for complex tissues such as the annulus fibrosus, scaffolds have failed to capture their multi-scale structura...

Graphene-based materials can have well-defined nanometer pores and can exhibit low frictional water flow inside them, making their properties of interest for filtration and separation. We investigate permeation through micrometer-thick laminates prepared by means of vacuum filtration of graphene oxide suspensions. The laminates are vacuum-tight in the dry state but, if immersed in water, act as...

Ultrasonic imaging is a powerful nondestructive evaluation (NDE) tool for flaw characterization. This thesis discusses the signal processing techniques developed for ultrasonic imaging of flaws in composite laminates. Commonly used time-domain signal processing techniques have problems including poor resolution, dependence on operator's experiences and subjectivity. Some transform-domain proces...