CO2 EOR and Storage in Oil Reservoirs — CO2 injection into tertiary oil reservoirs has been widely accepted as an effective technique for enhanced oil recovery (EOR), and has been used by the oil industry for over 40 years. Concerns over greenhouse gas emissions are leading to the investigation and realisation of its potential as a carbon storage method in recent years. With the right reservoir...

In an Electric Submersible Pump (ESP) lifted oil field, the ESP of each oil well should be operated inside its operating window. The total power consumed by the ESPs in the oil field should be minimized. The speed of the ESPs and the production choke valve opening should be optimally chosen for maximizing the total oil produced from the oil field. At the same time, the capacity of the separator...

A membrane inlet mass spectrometry (MIMS) system has been used for detection and analysis of two types of North Sea crude oil. The system was installed on-field on the Flotta Oil Terminal (Orkney, UK). It consisted of a quadrupole mass spectrometer (QMS) connected to the capillary probe with a silicone-based membrane. The produced mass spectra and calibration plots from the MIMS instrument show...

In the Persian Gulf, the major source of oil pollution is related to the transportation of tankers, offshore production and discharges by coastal refineries. The water dynamical field has been obtained using a new hydrodynamic model. Local wind is recognized as the principal driving force combining to the water dynamic field to determine oil drift on the sea surface. The Weibull probability dis...

The 2010 Deepwater Horizon (DWH) catastrophe had considerable impact on the ∼ 50 km long sandy beach system located along the Alabama shoreline. We present a four-year dataset to characterize the temporal evolution of various polycyclic aromatic hydrocarbons (PAHs) and their alkylated homologs trapped in the residual oil buried along the shoreline. Field samples analyzed include the first arriv...

The standard fenoxycarb fire ant bait formulation (Logic), composed of pregel defatted corn grits and soybean oil toxicant, was modified by eliminating the soybean oil. This formulation without soybean oil contained greater than 2 times more fenoxycarb and was as effective as the standard bait formulation against laboratory colonies of red imported fire ant, Solenopsis invicta Buren. In field t...

Millions of barrels of crude oil gushed freely from these wells, creating oil lakes in low-lying areas of the desert. Lakes were formed at more than 500 different locations, covering a total area initially estimated at 49 km. While the Kuwait Oil Company (KOC) has recovered 22.5 million barrels of the spilled crude; the remaining amount, is considered unrecoverable by standard methods. An estim...

Setting the effect of oil states (sufficient state and deficient state) on temperature field distribution and temperature rise of heavy hydrostatic bearing as the starting point, simulation research is conducted with the FLUENT 6.5, which is popular in current field of scientific research all over the world. The results show that the temperature of heavy hydrostatic bearing has a linearly incre...

Sarvak Formation as the oil reservoir with the most hydrocarbon potential in Yaran oil field is of special importance. The present research was conducted to study the reservoir parameters of this Formation. For this purpose, petro-physical crude data was first prepared and using the Geolog6.7 software, a petro physical plot was drawn. Afterward, petro-physical properties of reservoir were done ...

Mineral scale deposition in near wellbore regions of injection wells is one of the main challengeable issues during the water injection process, which magnifies the importance of robust models in predicting the amount of mineral scale deposition such as calcium sulfate. One of the main challenges of CaSO4 scale is in carbonated reservoirs, in which sensitive behavior is observed in related to t...