Natural gas is currently the natural substitute of petroleum as an energy source, since the foreseen ending up of this latter in the next decades. As a matter of fact, natural gas is easier to handle, less dangerous to be transported, somehow environmentally more friendly. The gas ducts operate with large flow rates over very long distances at high pressures, which are usually lowered in proxim...

A new analytical study performed to investigate the effect of the temperature difference between gas and particle in propagation of the spherical flames. The combustible system is containing uniformly distributed volatile fuel particles in an oxidizing gas (Air) mixture. The model includes evaporation of volatile matter of dust particles to known gaseous fuel (methane) and the single-stage reac...

This study employs the Taguchi method to approach the optimum co-gasification operation of torrefied biomass (eucalyptus) and coal in an entrained flow gasifier. The cold gas efficiency is adopted as the performance index of co-gasification. The influences of six parameters, namely, the biomass blending ratio, oxygen-to-fuel mass ratio (O/F ratio), biomass torrefaction temperature, gasification...

gas hydrates are a costly problem when they plug oil and gas pipelines. the best way to determine the hft and pressure is to measure these conditions experimentally for every gas system. since this is not practical in terms of time and money, correlations are the other alternative tools. there are a small number of correlations for specific gravity method to predict the hydrate formation. as th...

Solid oxide fuel cells (SOFCs) can be operated in a reversed mode as electrolyzer cells for electrolysis of H2O and CO2. In this paper, a 2D thermal model is developed to study the heat/mass transfer and chemical/electrochemical reactions in a solid oxide electrolyzer cell (SOEC) for H2O/CO2 co-electrolysis. The model is based on 3 sub-models: a computational fluid dynamics (CFD) model describi...

A large amount of COG (coke oven gas) is produced from coking plants every year, which contains 55–60% H2. In this work, the breakthrough separation H2 with ZIF-8/ethylene glycol-water slurry was studied. Following investigation (ab-ad)sorption isotherms single component gas CH4 and H2, main components coke gas, in different slurries their corresponding viscosities, influence operating conditio...

Centrifugal compressors are used in a large number of different compression applications. This tutorial addresses applications for centrifugal compressors in the upstream and midstream sector, such as LNG compression, refrigeration, pipeline compression, compression for gas injection, gas lift, gas gathering, export compression, air compression, and others. The focus is on the specific compress...

The main motivation of the presented paper is to study the amplitude and location of the maximum temperature (Tmax) and maximum temperature gradient (DT/Dxmax), respectively, as well as the performance parameters of the modeled, single, planar, anodesupported, solid oxide fuel cell (SOFC) with internal methane steam reforming at different operating conditions (i.e. current density and inlet vel...

A measurement system for current distribution mapping for a PEFC has been developed. The segmented anode is constructed so as to have high thermal conductivity in order to prevent the formation of large temperature gradients between the electrodes. The construction is therefore feasible for use at high current densities. Both segmented and unsegmented gas diffusion layers are used. The effect o...

In sour gas flares,  content like any other components in inlet gas influences adiabatic flame temperature, which, in turn, impacts on the pollutant emission. Wherever flame temperature increases, the endothermic reaction between  and  is accelerated, which means higher  emission to the atmosphere. In this work, we developed an in-house MATLAB code to provide an environment for combustion calcu...