This paper proposes an adaptive flux observer for induction motors, where stator and rotor resistances are estimated in online environments. The variation of motor parameters during operation degrades the performance of the controller and the flux observer. Among the parameters of induction motors, rotor resistance is a crucial one for flux estimation, and stator resistance also becomes critica...

The Brushless Doubly-Fed Reluctance Machine (BDFRM) has been widely investigated in numerous research studies since it is brushless and cageless there no winding on the rotor of this emerging machine. This feature leads to several advantages for machine comparison with its induction counterpart, i.e., Induction (BDFIM). Less maintenance, less power losses, also more reliability are major BDFRM ...

This report contains the results of a full-scale experimental feasibility study of rotor isolation employing the Dynamic Antiresonant Vibration Isolator (DAVI) . The full-scale experiments were performed on a UH-2 helicopter fuselage isolated from a simulated rotor and transmission. Tests were conducted for three directions of vibratory input at the hub on the nonisolated vehicle and then compa...

An automatic rotor trim control system was developed and successfully used during a wind tunnel test of a full-scale UH-60 rotor system with Individual Blade Control (IBC) actuators. The trim control system allowed rotor trim to be set more quickly, precisely and repeatably than in previous wind tunnel tests. This control system also allowed the rotor trim state to be maintained during transien...

Synchronous generators are of two type’s salient pole type and round rotor type. The load angle curve of a cylindrical rotor synchronous machine comprises a single sine term only while in salient pole synchronous generators, power-angle characteristic has two terms. The first term is the fundamental component due to field excitation (the same as the cylindrical rotor) and the second term ...

The paper deals with the vector control and predictive control of the induction motor. For the vector control, the rotor flux oriented one is pointed out, with highlight on the voltage source inverter type. The influence of the most important parameter variations (e.g. stator resistance) is discussed. A simple (and practical) method for avoiding these influences is presented, based on proper si...

An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor–dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the...

LIST OF SYMBOLS L s stator inductance(Primary inductance) L r rotor inductance (Secondary inductance) M mutual inductance Rs stator resistance Rr rotor resistance Rc cable resistance P pole number Vds,Vqs d-axis and q-axis components of the stator voltage vector Vs Vdr,Vqr d-axis and q-axis components of the rotor voltage vector Vr ids, iqs d-axis and q-axis components of the stator current vec...

The cage and reluctance rotors are two major types of rotor structures used in the doubly fed brushless machine (DFBM). In order to study comparatively the effects of different rotor structure on the DFBM, a prototype machine has been specially designed and built. The experimental parameter and performance comparisons between the axially laminated anisotropic (ALA) and cage-rotor machines are p...

In this paper, condition monitoring of a geared rotor system using finite element (FE) model updating and particle swarm optimization (PSO) method is onsidered. For this purpose, employing experimental data from the geared rotor system, an updated FE model is obtained. The geared rotor system under study consists of two shafts, four bearings, and two gears. To get the experimental data,  iezoel...