BACKGROUND Accumulated secretions after intubation can affect the resistance of an endotracheal tube (ETT). Our objective was to measure extubated patient tubes and size-matched controls to evaluate differences in resistance. METHODS New ETTs, with internal diameters of 7.0 through 8.5 mm, were tested as controls to establish the resistance of each size group as measured by pressure drop. Mea...

In this research the separation efficiency of deoiling hydrocyclone is evaluated using three-dimensional simulation of multiphase flow based on Eulerian-Eulerian finite volume method. The mixture approach of Reynolds Stress Model is also employed to capture the features of turbulent multiphase swirling flow. The obtained separation efficiency of Colman's design is compared with available experi...

Clogging of anode flow channels by CO(2) bubbles is a vital problem for further performance improvements of the micro direct methanol fuel cell (μDMFC). In this paper, a new type anode structure using the concept of the non-equipotent serpentine flow field (NESFF) to solve this problem was designed, fabricated and tested. Experiments comparing the μDMFC with and without this type of anode flow ...

The Axial compressor is an integrated part of a gas turbine. The central part of compressors is its blades. Blade aerodynamic has a significant effect on compressor performance. Because of the adverse pressure gradient in the compressor, any deviation in the blade profile has a significant influence on the flow field as well as the compressor performance. During the manufacturing and operation ...

conclusions results indicated that annular fluidized bed reactor’s adsorbers are useful techniques for vocs adsorption. comparison of two particle ranges indicates that in all concentrations and all flow rates of the experiments, smaller particle size adsorption are better. in superficial velocity above the minimum fluidization velocity, pressure drop of fluidized beds are less than the pressur...

The creeping flow of a dilute (0.025 wt%) monodisperse polystyrene/polystyrene Boger fluid through a 4 : 1 : 4 axisymmetric contraction/expansion is experimentally observed for a wide range of Deborah numbers. Pressure drop measurements across the orifice plate show a large extra pressure drop that increases monotonically with Deborah number above the value observed for a similar Newtonian flui...

In this paper, we perform two-dimensional simulations of cross-flow forward osmosis (FO) membrane modules in the presence of draw and feed channel spacers. For this purpose, the equations corresponding to the conservation of mass, momentum, and convection-diffusion for the mass fraction of solute are solved using a commercial finite volume flow solver. We consider six configurations of channel ...

Reduced-order modeling and design of zero-net mass-flux actuators require an understanding of several fundamental flow mechanisms governing the performance of these devices. One such aspect is the pressure drop due to oscillatory flow through a slot. In this Brief Communication, we use numerical simulations and experiments to examine physics-based scaling laws for the various mechanisms that de...

Flow boiling in small hydraulic diameter channels is becoming increasingly important in many diverse applications. The previous studies addressing the effects of the channel size on the flow patterns, and heat transfer and pressure drop performance are reviewed in the present paper. The fundamental questions related to the presence of nucleate boiling and characteristics of flow boiling in micr...