the fluid flow and heat transfer in a three-dimensional microchannel filled with al2o3- water nanofluid is numerically investigated. the hybrid scheme is used to discretize the convection terms and simpler algorithm is adopted to couple the velocity and pressure field in the momentum equations. the thermal and flow fields were analyzed using different volume fractions of nanoparticles and diffe...

This numerical study investigates the improvement of transient heat transfer in a plain tube using hybrid nanofluids consisting solid particles and twisted tapes with elliptical cuts, under non-uniform flux conditions. The analysis includes calculation Bejan number entropy production. Different working fluids, including water, CuO/water nanofluid, nanofluid 2% volume concentration Al2O3-Cu/wate...

In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu ...

A theoretical model for nanofluid flow, including Brownian motion and thermophoresis, is developed and analysed. Standard boundary layer theory is used to evaluate the heat transfer coefficient near a flat surface. The model is almost identical to previous models for nanofluid flow which have predicted an increase in the heat transfer with increasing particle concentration. In contrast our work...

For a solar thermal system, increasing the heat transfer area can increase the output temperature of the system. However, this approach leads to a bigger and bulkier collector. It will then increase the cost and energy needed to manufacture the solar collector. This study is carried out to estimate the potential to design a smaller solar collector that can produce the same desired output temper...

The thermal performances of a minichannel heat sink are experimentally investigated for cooling of electronics using nanofluid coolant instead of pure water. The Al2O3–H2O nanofluid including the volume fraction ranging from 0.10 to 0.25 vol.% was used as a coolant. The effects of different flow rates of the coolant on the overall thermal performances are also investigated. The flow rate was ra...

in order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. silver-oil nanofluid prepared by electrical explosion of wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. the average size...

Different kinds of nanofluids show peculiar characteristics. In this work, a mixed nanofluid consisting of single-wall carbon nanohorns and silver nanoparticles aqueous suspensions is prepared and optically characterized, in the perspective to merge the favorable optical characteristics of carbon nanohorn-based nanofluids to the good thermal properties of silver-nanofluids. For the samples, bot...

The nonlinear two-dimensional forced-convection boundary-layer magneto hydrodynamic MHD incompressible flow of nanofluid over a horizontal stretching flat plate with variable magnetic field including the viscous dissipation effect is solved using the homotopy perturbation method HPM . In the present work, our results of the HPM are compared with the results of simulation using the finite differ...