Purpose. To quantitatively evaluate the effects of peeled internal limiting membrane (ILM) area and anatomic outcomes following macular hole surgery using spectral domain optical coherence tomography (SD-OCT). Methods. Forty-one eyes in 37 consecutive patients with idiopathic, Gass stage 3-4 macular hole (MH) were enrolled in this retrospective comparative study. All patients were divided into ...

Nanofabrication technology plays an important role in the performance of surface plasmonic devices such as extraordinary optical transmission (EOT) sensor. In this work, a double liftoff process was developed to fabricate a series of nanohole arrays of a hole diameter between 150 and 235 nm and a period of 500 nm in a 100-nm-thick gold film on a silica substrate. To improve the surface quality ...

An experimental investigation of the parameters controlling the whistling frequency and amplitude of an orifice in a confined turbulent flow is undertaken. A circular single hole orifice with sharp edges, a hole diameter equal to 0.015 m and a thickness equal to 0.005 m, is arranged in an air test rig with an inner diameter equal to 0.03 m. The Mach number ranges around 0.02 and the Reynolds nu...

A hydro-mechanical approach is developed to investigate progressive fracture damage study with flow behavior in PMMA sample. A series of experiments are conducted to replicate the field work of hydrofraturing process. The PMMA (poly methyl methacrylate) specimens have been performed to simulate to fracture developments that are similar to hydrofraturing process. These Fractures are mechanical b...

In this paper, we have proposed a novel structure of the fabrication of a chalcogenide As2Se3 glass photonic crystal fiber (PCF) with increased core diameter. As comparision with the normal PCFs in which silica glass is used as core material, the proposed PCF has following feature; firstly we have used the chalcogenide As2Se3 glass as core material in which the first ring area contains no air h...

Deep hole drilling methods are used for drilling holes with a high length-to-diameter ratio, good surface finish and straightness. Due to the slender tool-boring bar combination needed for producing holes with a high length-to-diameter ratio, the process is susceptible to dynamic disturbances. These disturbances can be classified as chatter vibration or spiralling. The work presented in this pa...

Weight on the bit is accomplished by running in the hole, between the bit and the drill pipe, several lengths of extremely heavy thick-walled pipe, called “drill collars”. Drill pipe may weigh up to 30 kg/m. Drill collars, of larger diameter than drill pipe and of constant diameter throughout, can weigh up to IS0 kg/m. The full hanging weight of the whole assembly in the blocks in the derrick (...

Cylindrical specimens of bone measuring 15 mm in diameter were obtained from the lateral cortical layer of 10 pairs of femurs and tibias. A central hole 3.2 mm in diameter was drilled in each specimen. The hole was tapped, and a 4.5 mm cortical bone screw was inserted from the outer surface. The montage was submitted to push-out testing up to a complete strip of the bone threads. The cortical t...