Results of experimental investigation carried out to study the effects of addition of natural san fibres on the fracture toughness and impact strength of high-volume fly ash concrete are presented in this paper. San fibres belong to the category of ‘Natural Bast Fibres’, also known as ‘Sunn Hemp’. Its scientific (botanical) name is Crotalaria Juncea. It is mostly grown in the Indian Sub-Contine...

The sedimentation behavior of fine grained soil is largely dependent on its pore fluid chemistry. Physicochemical properties of the pore fluid, such as ionic strength and pH, could greatly influence the micro structure of kaolinite which in turn influences the sedimentation behavior. Other than ionic effect, adding fly ash can also cause different sedimentation behaviors due to the change of gr...

Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass ...

The Bayer process utilises high concentrations of caustic and elevated temperature to liberate alumina from bauxite, for the production of aluminium and other chemicals. Within Australia, this process results in 40 million tonnes of mineral residues (Red mud) each year. Over the same period, the energy production sector will produce 14 million tonnes of coal combustion products (Fly ash). Both ...

DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, herein to any specific commercial produ...

The Class F fly ash has been subjected to high energy ball milling and has been converted into nanostructured material. The nano structured fly ash has been characterized for its particle size by using particle size analyzer, specific surface area with the help of BET surface area apparatus, structure by X-ray diffraction studies and FTIR, SEM and TEM have been used to study particle aggregatio...

To study effects of several factors on the properties of fly ash based geopolymer concrete on the compressive strength and also the cost comparison with the normal concrete. The test variables were molarities of sodium hydroxide(NaOH) 8M,14M and 16M, ratio of NaOH to sodium silicate (Na2SiO3) 1, 1.5, 2 and 2.5, alkaline liquid to fly ash ratio 0.35 and 0.40 and replacement of water in Na2SiO3 s...

-The simple replacement technique of cement by fly ash in concrete does not produce a concrete with desirable early strength which is a significant parameter of present day emphasis of speedier construction. Increasing the amount of flyash replacement slows down the strength development at early ages. For effective mix proportioning of fly ash concrete, cementing efficiency factor has to be tak...

This research was conducted to develop flowable slurry containing fibrous residuals from pulp and paper mills. Two types of flowable slurry containing ASTM Class C fly ash were produced: fly ash slurry and sandy slurry. Often, the fly ash slurry made without fibrous residuals showed a tendency to set rapidly, and become unworkable. When the cement-to-fly ash ratio was increased to extend the ti...