In recent years significant progress has been made in the development of market applications for hydrogen fuel use in gas turbines. These applications include integrated gasification combined cycle (IGCC) and other types of process/power plants. Development of a new application using gas turbines for significant reduction of power plant CO2 emissions has initiated extensive efforts to expand th...

In this paper a gas turbine power plant including air preheater (recuperator), heat recovery steam generator and air cooler system was modeled. Eight parameters were selected as the design variables.  Fast and elitist non-dominated sorting genetic algorithm (NSGA-II) was applied (to maximize the exergy efficiency and to minimize the total cost rate) for the mentioned cogeneration system. Th...

As an important solution to issues regarding peak load and renewable energy resources on grids, large-scale compressed air energy storage (CAES) power generation technology has recently become a popular research topic in the area of large-scale industrial energy storage. At present, the combination of high-expansion ratio turbines with advanced gas turbine technology is an important breakthroug...

This paper summarises the work of a 5-year research programme into the heat transfer within cavities adjacent to the main annulus of a gas turbine. The work has been a collaboration between several gas turbine manufacturers, also involving a number of universities working together. The principal objective of the study has been to develop and validate computer modelling methods of the cooling fl...

A novel, patented topping power cycle is described that takes its energy from a very high-temperature heat source and in which the temperature of the heat sink is still high enough to operate another, conventional power cycle. The top temperature heat source is used to evaporate a low saturation pressure liquid, which serves as the driving fluid for compressing the secondary fluid in an ejector...

The cycles of the steam-injection gas-turbine systems are studied. The analyses of the parametric effects and the optimal operating conditions for the steam-injection gas-turbine (STIG) system and the regenerative steam-injection gas-turbine (RSTIG) system are investigated to ensure the maximum performance. Using the analytic model, the performance parameters of the system such as thermal effic...

This paper describes the U.S. market conditions in which the SGT6-6000G was designed and its evolution to accommodate the current and future market requirements. The U.S. market drivers during the SGT6-6000G design were deregulation and replacing the old base load generation, such as old coal plants, with high efficiency/output power and low emissions combined cycle plants. The SGT6-6000G was o...

High cycle fatigue has become the leading cause of failure in gas turbine engine blades in recent years [1]. The majority of these failures were associated with surface damage such as foreign object damage (FOD). Therefore, the ability of a material to resist impact damage and the subsequent fatigue propagation of any cracks that may result has become a crucial design consideration. Substantial...

The article investigates the effect of compressor pressure ratio, turbine inlet temperature and ambient temperature on the performance parameters of an air-cooled gas turbine cycle with evaporative cooling of inlet air. Air f ilm cooling has been adopted as the cooling technique for gas turbine blades. The mass of coolant required for turbine blade cooling is calculated f or a selected range of...

Large scale power production benefits from the high efficiency of gas-steam combined cycles. In the lower power range, fuel cells are a good candidate to combine with gas turbines. Such systems can achieve efficiencies exceeding 60%. High temperature Solid Oxide Fuel Cells (SOFC) offer good opportunities for this coupling. In this paper, a systematic method to select a design according to user ...