Recyclable concrete pavement was made from fly ash and crushed limestone sand and gravel as aggregates so that the concrete pavement could be recycled to raw materials for cement production. With the aim to use as much fly ash as possible for the sustainable development of society, while achieving adequate strength development, pavement concrete having a cement-replacement ratio of 40% by mass ...

The Bayer process utilises high concentrations of caustic and elevated temperature to liberate alumina from bauxite, for the production of aluminium and other chemicals. Within Australia, this process results in 40 million tonnes of mineral residues (Red mud) each year. Over the same period, the energy production sector will produce 14 million tonnes of coal combustion products (Fly ash). Both ...

DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, herein to any specific commercial produ...

The Class F fly ash has been subjected to high energy ball milling and has been converted into nanostructured material. The nano structured fly ash has been characterized for its particle size by using particle size analyzer, specific surface area with the help of BET surface area apparatus, structure by X-ray diffraction studies and FTIR, SEM and TEM have been used to study particle aggregatio...

To study effects of several factors on the properties of fly ash based geopolymer concrete on the compressive strength and also the cost comparison with the normal concrete. The test variables were molarities of sodium hydroxide(NaOH) 8M,14M and 16M, ratio of NaOH to sodium silicate (Na2SiO3) 1, 1.5, 2 and 2.5, alkaline liquid to fly ash ratio 0.35 and 0.40 and replacement of water in Na2SiO3 s...

-The simple replacement technique of cement by fly ash in concrete does not produce a concrete with desirable early strength which is a significant parameter of present day emphasis of speedier construction. Increasing the amount of flyash replacement slows down the strength development at early ages. For effective mix proportioning of fly ash concrete, cementing efficiency factor has to be tak...

This research was conducted to develop flowable slurry containing fibrous residuals from pulp and paper mills. Two types of flowable slurry containing ASTM Class C fly ash were produced: fly ash slurry and sandy slurry. Often, the fly ash slurry made without fibrous residuals showed a tendency to set rapidly, and become unworkable. When the cement-to-fly ash ratio was increased to extend the ti...

A comparative analysis on the physical nature of the fly ashes, obtained from three thermal power plants, situated in West Bengal, India is presented in this work. The particle size of the fly ash samples are estimated, and their morphology and compositional analysis are made. These samples are crystalline, and the major components are mullite and quartz. Quantitative magnetic characterizations...

In hybrid alkaline fly ash cements, a new generation of binders, hydration, is characterized by features found in both ordinary portland cement (OPC) hydration and the alkali activation of fly ash (AAFA). Hybrid alkaline fly ash cements typically have a high fly ash (70 wt % to 80 wt %) and low clinker (20 wt % to 30 wt %) content. The clinker component favors curing at ambient temperature. A h...