In this paper, combustion of char in the riser of circulating fluidized bed was modeled using ASPEN PLUS. Since physical and chemical phenomena are involved in the process, the model integrates the two-phase hydrodynamic sub-model with the reaction sub-model derived from the literature. In the proposed model, the fluidized bed is divided into several sections and the behavior of each section wa...

This paper focuses on the determination of the solid circulation of a CFB gasification system with a dual fluidized bed concept and the distribution of the solid hold up at different fluidization conditions. A mathematical model of the riser was designed and implemented in a model of a dual fluidized bed system. This model contains routines for calculation of each section of the dual fluidized ...

The present study is in two parts, the first part describes an investigation that was undertaken to determine the feasibility and hydrodynamic behaviour of a cold model circulating fluidized bed system proposed for the continuous combustion-gasification of biomass. The design is based on the principle that the char produced in the gasifier is circulated with the bed material and combusted in a ...

Fluidized bed was employed to investigate propane steam reforming over Ni-K/CeO2-Al2O3 catalyst. The catalyst was characterized by XRD, SEM, TG/DTA, and N2 adsorption-desorption tests. Effects of promoters, space velocity, temperature, and steam/propane (S/C) ratio on propane conversion, H2 yield, H2/CO ratio, and stability were studied and discussed. The experiments were carried out under cond...

In this study, Malaysian dolomites as secondary catalysts are placed at the downstream of fluidized-bed gasifier. Three types with different elemental ratios CaO-MgO content denoted P1, P2, and P3 investigated EFB gasification reaction cracking temperatures (700–900 °C). The performance a variation catalyst to biomass weight ratio (C/B) (0.05 0.30 w/w) is evaluated. findings showed that total g...

Recent experiments have shown that silane pyrolysis in a gas-solids fluidized bed may be an attractive way to produce ultra-pure silicon. Such a process would possess the general advantages of fluidized bed technology, namely, good contacting, thermal homogeneity, thorough mixing of particles, easy solids handling, and low pressure drop. Such a fluidized bed reactor is simulated using the two-f...

Fluidized bed is commonly used for struvite (MgNH4PO4·6H2O) recovery from wastewater. However, effective methods are lacking to describe the properties of the millimeter-scale struvite pellets in the fluidized bed, with the consequence of not predicting and optimizing the granulation process effectively. In this work, swine wastewater was used as the medium for struvite recovery by using fluidi...

In our previous paper, particle and temperature segregations in a fluidized bed of binary particle mixtures were experimentally examined, and heat transfer in the segregated fluidized bed was investigated. As the results, it was shown that the temperature segregation results mainly from low heat transfer coefficient through the interface layer, which exists between the flotsam-rich and jetsam-r...

Fluidized bed agglomeration is used to produce large and porous dry agglomerates with improved instant properties. Water (or binder solution) is sprayed in the fluidized bed of particles to render their surface sticky. The agglomerate growth results from the repetition of different steps (wetting of the particle surface, particles collision and bridging, and drying) and depends on the processin...