application of structures of flow pattern modification is one of the erosion control methods in bends. triangular vanes are among these structures which provide less scour depth compared to the other techniques such as spur dike. since little information on erosion and sedimentation pattern around triangular vanes are available, this study was conducted to study the effect of structure effectiv...

the dominant traditional view to designing drainage systems explains drainage goals only in terms of crop yield increase and rhizosphere improvement while ignoring the environmental impacts of drainage projects. nowadays, this view has been changed into a new one in which both environmental and agricultural purposes are taken into consideration. depth and spacing of subsoil drains are important...

The most important causes of bridge failure are local scour. In this study, laboratory experiments were conducted to investigate the effectiveness of slot as a protection device in reduction of depth of scour at cylindrical piers under clear water flow conditions. The development time of scour depth at the circular pier with and without a slot as a protection device was conducted. The experimen...

The addition of colour information to the computation of range/scene flow is proposed to improve its accuracy and robustness to ambiguities. This is applied in the form of additional optical flow constraints from aligned colour image data. Combining constraints gives improved velocity displacement fields for both synthetic and real datasets over using depth alone, or in using depth plus intensi...

the aim of this article is study of tool plunge depth (tpd) effects on mechanical properties of friction stir welding of aa1100 aluminium alloy to a441 aisi steel. for this purpose the 0.1, 0.2, 0.4, and 0.6 mm tpd selected and other welding parameters kept constant. the results shows that the frictional heat increases and stir zone grain size decreases with increasing tpd at both base metals. ...

Radiatively driven transfer flow perpendicular to a luminous disk was examined under a fully special relativistic treatment, taking into account radiation transfer. The flow was assumed to be vertical, and the gravity, the gas pressure, and the viscous heating were ignored. In order to construct the boundary condition at the flow top, the magic speed above the flat source was re-examined, and i...

background: constructed wetlands (cw s ) are mimic filtration process in natural wetlands that effectively remove variety pollutants from wastewater. the main objective was the feasibility evaluation for using of subsurface flow constructed wetland in nitrogen and phosphorus removal from synthetic based on domestic wastewater in lab scale. methods: in this study, a synthetic wetland subsurface ...

the purpose of this paper is to present a 2d depth-averaged model for simulating and examining unsteady flow patterns in open channel bends. in particular, this paper proposes a 2d depth-averaged model that takes into account the influence of the secondary flow phenomenon through calculation of the dispersion stresses. the dispersion terms which arose from the integration of the product of the ...

In open channels, the relationship between the specific energy and the flow depth exhibits a minimum, and the corresponding flow conditions are called critical flow conditions. Herein they are reanalyzed on the basis of the depth-averaged Bernoulli equation. At critical flow, there is only one possible flow depth, and a new analytical expression of that characteristic depth is developed for ide...

As demand for advanced photographic applications on hand-held devices grows, these electronics require the capture of high quality depth. However, under low-light conditions, most devices still suffer from low imaging quality and inaccurate depth acquisition. To address the problem, we present a robust depth estimation method from a short burst shot with varied intensity (i.e., Auto Bracketing)...