in this work the effects of various methods of agitation on the properties of electroless ni-p-mos2 composite coatings were investigated. magnetic stirring as well as purging the solution with gas (air, oxygen, nitrogen) were used. plating rate, chemical composition, mos2 distribution, and hardness of the deposit were measured. topography of coating was studied with metallography and scanning e...

Electroless cobalt films have been obtained by deposition using a plating bath containing two reducing agents: dimethylamineborane (DMAB) and sodium hypophosphite. This formulation allows spontaneous activation on copper followed by auto catalytic electroless plating. CoWBP and CoBP films are proposed as diffusion barriers and encapsulation layers, for copper lines and via contacts for ULSI int...

Despite having some useful properties, stainless steels suffer from lack of suitable surface hardness. In this research electroless Ni-B-Tl coating was used with the aim to increase their surface hardness. The effects of Nickel chloride, Sodium borohydride, Thallium nitrate and Ethylendiamin on the chemical composition of coating were studied. To achieve an increase in hardness, the effects of ...

Microbial contamination of medical devices and treatment rooms leads to several detrimental hospital device-associated infections. Antimicrobial copper coatings are a new approach control healthcare-associated infections (HAI’s). This review paper focuses on the efficient methods for depositing highly adherent copper-based antimicrobial onto variety metal surfaces. properties produced by variou...

While problems related to CO poisoning still exist for the anode, most of the efficiency loss (80%) in a fuel cell arises due to the cathode. Oxygen reduction at the cathode requires the largest amount of the catalyst in PEM fuel cells due to its lower activity. This problem needs to be solved before mass commercialization of fuel cells can be achieved. The specific objective is to synthesize n...

The study the hardness, wear corrosion resistance of as-coating, heat treatment and plasma-nitriding Ni- B electroless coatings was deposit on 4340 steel. After procees coating, samples were in percentage hydrogen/nitrogen ratio (50%), temperature 400°C, at 4 hours compared with treatment. characterization by FESEM, XRD, microhardness, Corrosion Resistance surface roughness measurements. Microh...

The dependence of performance of silicon nanowires (SiNWs) solar cells on the growth condition of the SiNWs has been described. Metal-assisted electroless etching (MAE) technique has been used to grow SiNWs array. Different concentration of aqueous solution containing AgNO3 and HF for Ag deposition is used. The diameter and density of SiNWs are found to be dependent on concentration of solution...