Microstructure, precipitation hardening response, and mechanical and physical properties of Cu-Cr-Ag alloy and Cu-Cr-Ag-Ce alloy have been investigated using transmission electron microscopy, scanning electron microscope, optical microscope, electrical conductivity analysis, and tensile test. The influence of element Ce on the matrix refinement, impurity removal, and precipitation in the Cu-Cr-...

Ab intio molecular dynamics simulations show that the electrical conductivity of liquid SiO2 is semimetallic at the conditions of the deep molten mantle of early Earth and super-Earths, raising the possibility of silicate dynamos in these bodies. Whereas the electrical conductivity increases uniformly with increasing temperature, it depends nonmonotonically on compression. At very high pressure...

Measurements of the quasistatic and frequency dependent electrical conductivity below 1 MHz were carried out on wet-spun, macroscopically oriented, calf thymus deoxyribonucleic (DNA) and umbilical cord hyaluronic acid (HA) bulk samples. The frequency dependence of the electrical conductivity in the frequency range of approximately 10(-3) - 10(6) Hz of both materials is surprisingly rather simil...

The electrical conductivity of the neutron star crust at low temperatures is calculated by taking into account the mixing of the electron wave functions due to the interaction with the crystal lattice of atomic nuclei. We show that the previously existed model of exponential reduction of the electron–ion scattering rate can lead to an overestimation of the electrical conductivity by several ord...

Low solar absorptivity, space environmentally stable polymeric materials possessing sufficient electrical conductivity for electrostatic charge dissipation (ESD) are of interest for potential applications on spacecraft as thin film membranes on antennas, solar sails, large lightweight space optics, and second surface mirrors. One method of imparting electrical conductivity while maintaining low...

Electrical impedance tomography (EIT) is a technology developed to image the electrical conductivity distribution of a conductive medium. The technology is of interest because of its low cost and also because the measurement of the electrical conductivity brings direct information about the composition of the conductive medium. Because the ground is conductive to a certain extent, the technolog...

Methods used to strengthen metals generally also cause a pronounced decrease in electrical conductivity, so that a tradeoff must be made between conductivity and mechanical strength. We synthesized pure copper samples with a high density of nanoscale growth twins. They showed a tensile strength about 10 times higher than that of conventional coarse-grained copper, while retaining an electrical ...

The aim of this work was to compare the effects of freezing rate on electrical conductivity of potatoes, carrots and apples. Electrical conductivity tests were conducted on a custom ohmic cell while samples texture was measured by means of a universal testing machine. The raw un-pretreated samples were used as control. This study showed that freezing pre-treatments lead to differences in electr...

Poly(p-phenylenevinylene) (PPV) was chemically synthesized via the polymerization of p-xylene-bis(tetrahydrothiophenium chloride) monomer and doped with H(2)SO(4). To improve the electrical conductivity sensitivity of the conductive polymer, Zeolites Y (Si/Al = 5.1, 30, 60, 80) were added into the conductive polymer matrix. All composite samples show definite positive responses towards NH(4)NO(...

Free electron model, constructed by Drude and Lorentz near 1900 (well before quantum mechanics was developed), can qualitatively explain the DC electrical conductivity, AC electrical conductivity, Hall effect, and magnetoresistance. Later inclusion of Fermi-Dirac distribution (as opposed to Boltzmann distribution) helps to explain the thermal conductivity and specific heat of electrons. However...