The authors propose a design philosophy for steel buildings in moderate seismic regions that draws on familiar concepts of ductility and capacity design, but also integrates the concepts of reserve capacity, elastic flexibility and strength to broaden the field of design possibilities. The paper discusses structural systems representing each of these concepts: Moderate-Ductility Concentrically-...

Widespread adoption of metallic glasses (MGs) in applications motivated by high strength and elasticity combined with plastic-like processing has been stymied by their lack of tensile ductility. One emerging strategy to couple the attractive properties of MGs with resistance to failure by shear localization is to employ sub-micron sample or feature length scales, although conflicting results sh...

Many traditional approaches for strengthening steels typically come at the expense of useful ductility, a dilemma known as strength-ductility trade-off. New metallurgical processing might offer the possibility of overcoming this. Here we report that austenitic 316L stainless steels additively manufactured via a laser powder-bed-fusion technique exhibit a combination of yield strength and tensil...

Strengthening materials traditionally involves the controlled creation of internal defects and boundaries so as to obstruct dislocation motion. Such strategies invariably compromise ductility, the ability of the material to deform, stretch, or change shape permanently without breaking. Here, we outline an approach to optimize strength and ductility by identifying three essential structural char...

The seismic performance of RC columns could be significantly improved by continuous spiral reinforcement as a result of its adequate ductility and energy dissipation capacity. Due to post-earthquake brittle failure observations in beam-column connections, the seismic behaviour of such connections could greatly be improved by simultaneous application of this method in both beams and columns. In ...

Ductility demand during an earthquake has long been known to be a good measure of structural damage in buildings during earthquakes. For design purposes it is considered a priori according to some rules that may or may not apply to each building. Such ductility parameters are mostly based on the response of a single degree of freedom system to ground motions. However, it has been probed that th...

Abstract Metals with a bimodal grain size distribution have been found to both high strength and good ductility. However, the coordinated deformation mechanisms underneath ultrafine-grains (UFGs) coarse grains (CGs) still remain undiscovered yet. In present work, Cu 80% volume fraction of recrystallized micro-grains was prepared by annealing equal-channel angular pressing (ECAP) processed ultra...

Nonlinear static analysis is a validated tool for the seismic evaluation of existing and new structures, specifically reinforced concrete buildings. In order to assess performance frames designed according Venezuelan code, configurations low-, medium-, high-rise buildings are subjected 20 different load patterns considering nonlinear behavior FEMA P695. A total 140 frame models were analyzed us...

The influence of short-time heat treatments on Ti-4.5Zr alloys (wt%) with respectively low (2000 ppm) and high (6000 oxygen contents is investigated the aim optimizing their strength/ductility trade-off. Starting from a cold-rolled state (85% total thickness reduction), level ductility restored in both systems thanks to recovery process while resistance drop limited, thus proving effectiveness ...

Recent research suggests that extraordinary combinations of strength and ductility can be achieved in the so–called δ–TRIP steels, which contain ferrite, bainite and austenite. A part of the reason for the ductility of almost 40% elongation at a strength of some 900MPa, is believed to be the optimal stability of the austenite to plastic deformation. We demonstrate here that mechanical stabilisa...