Gentle in-store drying of popping corn may reduce the risk of stress fissures being generated, an effect which reduces popcorn expansion volume. In order to allow optimisation studies of in-store drying to be conducted, thermophysical properties of two current Australian popping corn varieties were measured in the range 30-50°C, at moisture contents from 12% to 20% wb. Models were developed for...

The objective of this study was to determine the drying behavior of 2-phase olive mill waste (2POMW) under isothermal microwave-convection drying conditions. 2POMW samples were dried in a thin layer in a variable-power pilot microwave oven with impinging air, using a feedback controller to maintain sample temperature at one of four levels. Moisture loss and shrinkage of the samples were recorde...

Drying data for individual rice kernels and bulk samples selected from various tillers of a plant and from different maturity groups were experimentally obtained. The data showed that over 93% of the drying occurred within 24 h of exposure to air at 40° C and 60% relative humidity. Differences in the equilibrium moisture content and drying rate constant among kernels were observed. Equilibrium ...

in the present study, saffron was dried using a heat pump-assisted hybrid photovoltaic-thermal solar dryer. the effect of different drying air temperatures at three levels (40, 50, and 60oc) and two different modes of the dryer (with and without heat pump system) were investigated on drying behaviour of saffron. after collecting the pertinent data, eleven drying models were used to describe dry...

modeling of drying kinetics of canola was studied at 30 to 100 ?c in a lab scale fluidized bed dryer. drying rate of the crop was assessed, using many conventional moisture ratio models employed in food science. effective diffusivity coefficient (deff) and activation energy (ea) of kernel moisture were determined using fick's law of diffusion and arrhenius equation. besides, the effects of...

When colloidal suspensions dry, stresses build up and cracks often occur -a phenomenon undesirable for important industries such as paint and ceramics. We demonstrate an effective method which can completely eliminate cracking during drying: by adding emulsion droplets into colloidal suspensions, we can systematically decrease the amount of cracking, and eliminate it completely above a critical...

banana samples were purchased from a local market in sabzevar located at northeast of iran. then samples stored at refrigerator between 5–10oc during experiments, for prevention of chilling injury, 36 samples at three replications were prepared so as bananas were peeled and sliced with a sharp knife at three thicknesses (3, 5 and 10 mm) and then treated by three pretreatment methods (t1: chemic...

This study was conducted to investigate the effect of blanching treatment (98 °C for 3 and 6 min) and air drying temperature of 40, 50 and 60 °C on the thin layer drying characteristics such as drying time, drying rate constant, effective moisture diffusivity and activation energy, as well as on anthocyanin content of black carrot shreds. It was observed that drying temperature affected the dry...