This paper presents the results of a laboratory investigation to determine the geotechnical properties of fresh municipal solid waste (MSW) collected from the working phase of Orchard Hills Landfill located in Davis Junction (Illinois, USA). Laboratory testing was conducted on shredded MSW to determine the compaction, hydraulic conductivity, compressibility, and shear strength properties at in-...

Soft clays are defined as cohesive soil whose water content is higher than its liquid limits. Thus, soil-cement mixing is adopted to improve the ground conditions by enhancing the strength and deformation characteristics of the soft clays. For the above mentioned reasons, a series of laboratory tests were carried out to study some fundamental mechanical properties of cement stabilized soft clay...

inspecting the behavior of the rockfill materials is of significant importance in analysis of rockfill dams. since the dimensions of grains in such materials are greater than the conventional sizes suitable for soil mechanics tests, it is necessary to experimentally study them in specific large-scale apparatuses. in this research, the behavior of rockfill materials in two large rockfill dams co...

The determination of shear strength parameters for coarse granular materials such as rockfill and waste rocks is challenging due to their oversized particles the minimum required ratio 10 between specimen width (W) maximum particle size (dmax) tested samples direct tests. To overcome this problem, a common practice prepare test by excluding particles. This method called scalping scaling down te...

seismic piezocone device (scptu) together with resonant column and cyclic triaxial test apparatus are employed to measure small strain shear modulus (g0) of carbonate sandy and clayey soils of southern coasts of iran. a large area of southern regions of iran is formed from clay, silt and sand. in this study, maximum shear modulus that is derived from both field (by seismic piezocone) and labora...

Amorphous micro-steel (AMS) fibre made by cooling of liquid pig iron is flexible, light and durable to corrosion, then to be compatible with high flowable and disperable states of mixing as well as high ductile post-cracked performances to apply in fibre-reinforced cementitious composites. In the current research, AMS fibre-reinforced cementitious composites based on cement and alkali-activated...

SYNOPSIS Results of unconsolidated-undrained triaxial tests, field vane shear tests and cone penetration tests have been used to develop correlations between undrained shear strength and cone resistance for a soft to medium alluvial clay in the Lopez Canyon area of San Diego. When comparing uu triaxial results with cone resistance, the average cone factor was 11 with a standard deviation of 1.5...