In this paper, Performance of three-level integrated ac–dc converter with Hysteresis Current Control Technique is presented. The proposed converter combines with the operation of the boost power factor correction and the three-level dc–dc converter. By the implementation of Hysteresis Current controller, the switching sequence is under controlled condition and the output voltage of the proposed...

This paper is about a new dc-dc converter based on VOLTAGE MULTIPLIER CELL and MULTI STATE SWITCHING CELL. This method can be applied for all type of converters like BUK, BOOST,BUKBOOST,CUK,SEPIC &ZETA. To verify the operating principle BOOST converter is chosen. Experimental analysis is obtained from 1Kw lab prototype and the results are verified using simulation software. The output current a...

Switched Boost Inverter (SBI) is a single stage DC to AC power converter and it is derived from the Z source inverter employs an LC impedance network in between the main inverter bridge and the power source. This SBI converter can possible to supply both DC and AC loads simultaneously from a single dc input source. Here, reducing the inverter switching stress. Also, this converter provides to s...

In this paper, a new structure for buck-boost Z-source converter based on Z-H topology is proposed. The proposed converter consists of two LC networks similar to the conventional Z-source and Z-H converters. One of the characteristics of the proposed structure is that, without any changing in its’ power circuit, it can be used in different conversions such as dc/dc, dc/ac and ac/ac. This unique...

In hybrid and renewable energy system, multiple-input converter is the best choice to integrate various input sources for supplying power to the load. In this paper, a multi-input DC-DC converter having ability to transfer energy from one of the sources to the energy storage source is presented. This feature results in improved reliability. In addition to this, energy sources having distinct vo...

This paper explains Design, simulation and implementation of Perturb and Observe (P&O) Fuzzy Based control of DC-DC Converter in Photo-Voltaic (PV) System. A standalone PV system connected to a Boost converter with a resistive load and Maximum Power Point Tracking (MPPT) is modeled and implemented. A battery is used for storage purpose. The simulations were done in MATLAB/SIMULINK Environment. ...

This paper presents high boost isolated dc-dc converter with closed loop control to provide high voltage regulation control suitable for renewable energy source. The circuit consists of active clamp circuit and boost converter with isolated transformer. The circuit employs capacitors are charged in parallel and discharged in series by isolated transformer inductors. The active clamp circuit is ...

This paper presents two current control techniques of an ac-dc boost converter to obtain unity power factor (PF). Single phase high power factor rectification is the most frequently accomplished using a boost converter. This converter reshapes distorted input current waveform to approximate a sinusoidal current that is in phase with the input voltage. There are several current control technique...

This work introduces a new non-isolated buck-boost DC-DC converter. Interleaved configuration of the suggested structure increases the voltage conversion ratio. The voltage rate of the suggested converter can be stepped-up and stepped down for lower values of duty-cycle, which causes to decrease in the conduction losses of the system. The voltage conversion ratio of the recommended structure is...

In this paper, a new bidirectional buck-boost dc-dc converter with capability of soft switching and zero input current ripple is proposed. The coupled inductor is used in the proposed converter to eliminate the input current ripple. In the proposed converter, zero voltage switching (ZVS) and zero current switching (ZCS) can be obtained for the main and auxiliary switches, respectively. In addit...