The objectives of this study were to compare the polymerization shrinkage of three orthodontic adhesives. In addition we wanted to determine the effectiveness of the high-intensity quartz tungsten halogen (HQTH) in curing orthodontic adhesives on polymerization shrinkage with that of the quartz tungsten halogen (QTH). A total of 120 glass ring molds were prepared using a low-speed saw. The inte...

Objectives It has been reported that the water, solvents, or the primer incorporated into adhesive resins decrease the polymerization, compromise the mechanical properties, reduce the bond strength, and lead to a poor bonding performance of self-etch adhesives. This article evaluated the effect of air-drying and light-curing duration of self-etch adhesives on the micro-shear bond strength betwe...

An optically efficient structure was proposed and fabricated to realize high brightness organic light emitting diode (OLED) displays based on a white OLED prepared with the air-gapped bridges on the quantum dot (QD) patterns. Compared with a conventional white OLED display, in our experiments, the optical intensity of the proposed OLED display shows the enhancement of 58.2% in the red color and...

The orthophosphate host family, A(I)B(II)PO(4) (A(I) = monovalent cation, B(II) = divalent cation), has recently been made available as phosphors that combine with near-UV lighting chips for use in solid-state white light-emitting diodes (LEDs). This study elucidates the crystalline structure and lattice parameters of the products via a solid-state reaction, using powder X-ray diffraction (XRD)...

A novel BODIPY-containing organic small molecule is synthesized and employed as a down-converting layer on a commercial blue light-emitting diode (LED). The resulting hybrid device demonstrates white-light emission under low-current operation, with color coordinates of (0.34, 0.31) and an efficacy of 13.6 lm/W; four times greater than the parent blue LED.

Light-emitting diodes (LEDs) based on zinc oxide (ZnO) nanorods grown by vapor-liquid-solid catalytic growth method were irradiated with 2-MeV helium (He+) ions. The fabricated LEDs were irradiated with fluencies of approximately 2 × 1013 ions/cm2 and approximately 4 × 1013 ions/cm2. Scanning electron microscopy images showed that the morphology of the irradiated samples is not changed. The as-...

We report luminescent characteristics and mechanical stability of a flexible organic light-emitting diode (FOLED) using an amorphous ZnO-doped In2O3 (a-IZO) anode with a low sheet resistance of and a high optical transparency of 86%. The FOLED consisting of a-IZO/poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS)/poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thiadiaz...

White hybrid inorganic/organic light-emitting diodes (LEDs) were fabricated by combining a novel organic colour converter with a blue inorganic LED. An organic small molecule was specifically synthesised to act as down-converter. The characteristics of the white colour were controlled by changing the concentration of the organic molecule based on the BODIPY unit, which was embedded in a transpa...

introduction: discoloration of resin composites is a common reason for replacement of these restorations. the aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. materials and methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek z250 resin composite. specimens were divid...

Cyanoacrylate (CA) and its homologues have a variety of medical, dental and commercial applications as adhesives. The increasing use of CA in dentistry, particularly as an adhesive and sealing glue, has raised concerns regarding its potential toxicity in humans. Reported toxicity of CA is uncommon in the dental workplace, but may manifest as conditions such as urticaria, contact dermatitis and ...