Batch adsorption experiments were performed for the removal of chromium (III) and chromium (VI) ions from aqueous solutions using Canadian peat and coconut fiber. The Langmuir model was used to describe the adsorption isotherm. The maximum adsorption for peat reached 18.75 mg/g for Cr(III) and 8.02 mg/g for Cr(VI), whereas the value for fiber was slightly higher and reached 19.21 mg/g for Cr(II...

The objective of this study is to investigate the removal efficiency of Cr(VI) by Bacillus subtilis, Pseudomonas aeruginosa and Enterobacter cloacae from aqueous solution under different process conditions. Batch mode experiments were carried out as a function of solution pH, biosorbent dosage, Cr(VI) concentration and contact time. The FT-IR spectra and SEM analysis of the biosorbent were reco...

The present study investigates an NF process for removal of copper and hexavalent chromium, studying the effect of pH (5, 7, 9) as well as contaminants' concentration (50, 500, 5000 µg/L) at a constant pressure of 8 bar; with the recovery rate, regulated at 75±2%. To determine the main factors, affecting the system performance, and evaluate the interaction effects among the factors, the experim...

The present research describes the performance of NiO NPs/Ag-clinoptilolite composite adsorbent for the removal of uranium (U(VI)) ions from drinking water of Dezful city-Iran. Prior to the experiment reactions, Na-clinoptilolite was chemically treated with NaCl, Silver ions (Ag+) and subsequently Nickel (NiO) NPs to prepare NiO NPs/Ag-clinoptilolite. The samples were characterized by SEM, AAS,...

This study proved that vermiculite, a natural occurring mineral, can effectively remove and stabilize Cr(VI) from fine ferrochrome dust leachate. Batch adsorption studies were carried out to determine the effect of pH, contact time and adsorbent dose on the removal of Cr(VI). The process was found to be highly pH dependent. The optimum conditions for the Cr(VI) removal are at a pH of 1.5, conta...

present study dealt the removal of cr(vi) in a tannery industry wastewater using rice husk silica powder as an adsorbent.the experimental investigations have been carried out by using rice husk silica powder for different adsorption dosage, different contact time and different ph against the initial cr(vi) concentration of 292 mg/l. the maximum percentage removal of cr(vi) in the tannery indust...

The present study investigates an NF process for removal of copper and hexavalent chromium, studying the effect of pH (5, 7, 9) as well as contaminants' concentration (50, 500, 5000 µg/L) at a constant pressure of 8 bar; with the recovery rate, regulated at 75±2%. To determine the main factors, affecting the system performance, and evaluate the interaction effects among the factors, the experim...

Clean-up of wastewaters with coexisting heavy metals and organic contaminants is a huge issue worldwide. In this study, a novel anatase/titanate nanosheet composite material (labeled as TNS) synthesized through a one-step hydrothermal reaction was demonstrated to achieve the goal of simultaneous removal of Cr(VI) and 4-cholophenol (4-CP) from water. TEM and XRD analyses indicated the TNS was a ...

heavy metals in water resource are one of the most important environmental problems of countries. chromium is considered as one of the important environmental pollutants due to its toxicity considered as water contaminant that may disturb metabolic activity. this research aims to study the potential of jujube fruit powder for low cost adsorption of cr (vi) in compression with granular activated...

Coconut husk fibre and rice straw were found to be able to remove significant amount of Cr (III) ions from aqueous solutions. Its removal is a function of pH and concentration. The optimum pH range for maximum uptake is between 4 and 6 for both substrates. The adsorption capacity was found to be 0.55 and 0.30 millimole Cr (III) / g substrate for coconut husk and rice straw respectively. The ads...