This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties of the products described or a warranty for fitness for a particular purpose. Classified according to EU Directive 1999/45/EC For further information see our " Material Safety Data Sheets "....

Steel slabs are reheated in pusher-type furnaces up to a temperature of 1200°C in the steel sheet manufacturing process. In this article we describe a control system that uses an on-line numerical model to calculate the furnace setpoints in order to improve the heating quality. Examples of actual furnace operation with and without the system are presented to show the improvements that are obtai...

The press formability of a dual-phase stainless steel sheet consisting of ferrite and austenite phases was estimated from a viewpoint of texture using plastic strain ratios (r-values). From the comparison of the mechanically obtained r-values by tensile test and the r-values calculated from the crystal orientation distribution functions (ODFs) of each phase, we found the ferrite phase contribut...

The Atominstitute (ATI) of the Vienna University of Technology utilizes a TRIGA Mark II research reactor for last fourty eight years at a nominal reactor power of 250 kW (thermal). It has a completely mixed core and employing three different types of fuels i.e. aluminium clad fuel with 20% enrichment, stainless steel (SS) clad fuel with 20% enrichment and SS clad FLIP fuel with 70% enrichment. ...

In the present investigation, a detailed mechanical and electrochemical properties of multiple-layer laser clad 316L stainless steel (from the powders produced by gas atomized route) has been carried out. Multiple-layer laser cladding of 316 L stainless steel has been conducted using a diode laser. The mechanical property (microhardness) of the fabricated product has been evaluated using a micr...

Deep drawing process is one of the most applicable methods in producing industrial parts. In this process, the initial blank deforms to final product using a rigid punch and die. In this investigation, the effect of deep drawing process parameters of brass/steel laminated sheet composites on required forming force has been investigated. The process simulated using finite element method (FEM) an...

the steel shear wall and composite steel plate shear wall is introduced in recent three decade and is considered and is spread rapidly. composite steel plate shear wall which is made of a layer of thin steel sheet with coating of reinforced concrete in one or both sides of steel palate is considered a third generation of resistance shear walls against lateral loads that in addition to increasin...