in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...

Cold roller bending is commonly used for bending straight members with hot rolled wide-flange sections to create arches. This process induces plastic deformations along the member, so that it can acquire the desired curvature. The resulting residual stress distribution is different from the wellknown residual stress pattern due to hot rolling. Extensive studies have shown that the influence of ...

Damping capacity of hypo-eutectic Zn-Al alloys as a function of rolling ratio is investigated. Effect of heat treatment after cold rolling on the damping capacity is discussed. Damping tests were carried out using the method of the free decay of vibrations in bending oscillation. With an increase in rolling reduction, the damping capacity was increased. As the results of tensile and hardness te...

Abstract: In the present study the effect of thermomechanical treatment (cold work and annealing) on the transformation behavior of NiTi shape memory alloys was studied. Differential scanning calorimetry was used to determine transformation temperature and its relation to precipitates and defects. Three alloys including Ti-50.3at.% Ni, Ti-50.5at.% Ni (reclamated orthodontic wires) and 50.6at...

In this work, cold-rolling was utilized to induce a high density of crystal defects in Al0.3CoCrFeNi high-entropy alloys. The effects annealing temperature on static recrystallization, precipitation behavior and mechanical properties were investigated. With increasing from 590 °C 800 °C, the area fraction recrystallized region increases 26.9% 93.9%. Cold-rolling deformation largely promotes B2 ...

Abstract. The technological process of manufacturing cold-rolled strip with a thickness 0.5-1.5 mm from high-strength steel grades on cold rolling mills can consist 2 or even 3 operating cycles "cold - intermediate annealing". This is due to significant hardening such steels during and, as result, limitations the maximum allowable forces. Each additional cycle annealing" significantly increases...