This paper presents the exergy analysis of a desalination unit using humidification-dehumidification process. Here, this unit is considered as a thermal system with three main components, which are the heating unit by using a solar collector, the evaporator or the humidifier, and the condenser or the dehumidifier. In these components the exergy is a measure of the quality or grade of energy and...

Conventional control techniques are not able to accomplish the stable cooling in vapor compression air conditioning system. This paper describes the fuzzy models of refrigerating compressor, expansion valve, evaporator and condenser as basic elements of vapor compression air conditioning system. Compressor speed, delivery pressure, refrigerant flow rate, valve opening area, pressure difference ...

Preliminary note This paper presents the exergy destruction of an evaporator or a condenser or evaporator and condenser. The exergy destruction can be analytically calculated by using the same non-dimensional variables which have been used by its energy analysis. The one additional variable is the ratio of absolute input temperatures of both streams. This means that the given model enables the ...

In the case of multi-component condensation the ‘condensing vapour contains a mixture of components having different boiling points, which condense over a wide temperature range, either in presence of or absence of non-condensing material. In this work, a design algorithm for the condensation of a multi-component vapour mixture in shell side of a shell and tube vertical condenser has been devel...

Introduction The optical components of a microscope are its two imaging lenses (eyepiece and objective) and a condenser lens. The eyepiece and objective are responsible for magnifying the image of the specimen and projecting it onto the viewer’s retina or onto the film plane in a camera. The job of the condenser lens is to focus a cone of incident light onto the specimen. To provide the inciden...

We give new constructions of randomness extractors and lossless condensers that are optimal to within constant factors in both the seed length and the output length. For extractors, thismatches the parameters of the current best known construction [LRV03]; for lossless condensers,the previous best constructions achieved optimality to within a constant factor in one parameteronly at ...

Through its ‘Column Targeting Tools’ the Aspen plus simulator performs the ‘Thermal Analysis’ for rigorous column (RadFrac) calculations and produce Column Grand Composite Curves (CGCC) and exergy loss profiles. The CGCC displays the net enthalpies for the actual and ideal operations at each stage, and the cold and hot heat utility requirements, while the exergy loss profiles indicate the level...

For many countries, increasing energy efficiency and reducing greenhouse gas emissions are key countermeasures to cope with the energy crisis and climate change. Of the various heating equipment such as heat pumps, gas-fired boilers, oil-fired boilers, or electric boilers, heat pumps are widely adopted for space heating, water heating, and process heating by households, business, and industry d...

Although water-cooled chillers are more energy efficient than air-cooled chillers, a majority of chilled water systems use air-cooled chillers. In cold weather climates, air-cooled chillers are capable of functioning in low ambient temperatures with few operational concerns, where as water-cooled chiller systems must be equipped to prevent cooling tower freezing. The integrated chiller system a...

Flat tube heat exchangers with louvered fins were applied in order to meet the performance requirements and compactness in automotive air conditioning systems. Experimental and simulation study focusing on the air side thermal hydraulic performance of automotive heat exchangers were performed in this article. Test results showed that the heat capacity of a condenser with 5.4 mm height louvered ...