Existing literature suggests that substituting mineral aggregates with tire-derived aggregate (TDA) in concrete increases the ductility and toughness of at cost lowering its strength stiffness. Hence, TDA has applications dynamic systems, such as lateral resisting frames sustaining seismic loads. This study investigated application buckling-restrained braced (BRBFs). Buckling-restrained brace (...

Received: November 02, 2017 Revised: January 12, 2018 Accepted: January 17, 2018 Abstract: Introduction: Retrofit interventions are often performed by introducing in structures dissipative devices able to improve the global seismic response particularly in terms of energy dissipation capacity. In the case of Concentric Braced Steel Frames (CBF), these devices are generally introduced in the for...

This paper investigates the collapse risk of seismically isolated buildings that are designed by procedures ASCE/SEI 7-16 standard for sites within 5 km active fault controls hazard. The study is based on six-story perimeter frame with special concentrically braced frames a location in California. seismic isolation systems considered this comprised either: (i) triple friction pendulum bearings ...

The present study assesses the seismic performance of steel moment resisting frames (SMFs) retrofitted with different bracing systems. Two structural configurations were utilized: ordinary concentrically braces (OCBFs), buckling-restrained braces (BRBFs). A 7-story and 18-story steel perimeter SMFs were designed with insufficient lateral stiffness to satisfy code drift limitations in high seism...

braced frames structures have a good lateral stiffness against earthquakes. however, energy loss of their members is slight and strong forces are given to the structures. moment frames have a more flexible function against earthquakes and also have a better flexibility than braced frames. however, since its lateral stiffness is low, too much displacement of the structure results in an increase ...

Displacement-based methods are recognized as appropriate approaches to reach the goals of performance-based seismic design method. In the direct displacement-based seismic design method, the seismic yield displacement is applied as one of the important design parameters. In this paper, a new relation is suggested to determine the lateral displacement pattern at first yielding of eccentrically b...

The design of steel chevron-braced frames as per Eurocode 8 is based on the idea that only braces should buckle and yield during ground motions, while other members remain elastic. elastic braced also allowed. However, in both cases, seismic performance frame may be compromised because premature yielding/buckling columns. This paper proposes an alternative procedure promotes yielding beams addi...