نتایج جستجو برای: combinational curing

تعداد نتایج: 13993  

2016
Haseog Kim Sangki Park Seahyun Lee

CO₂ emitted from building materials and the construction materials industry has reached about 67 million tons. Controls on the use of consumed fossil fuels and the reduction of emission gases are essential for the reduction of CO₂ in the construction area as one reduces the second and third curing to emit CO₂ in the construction materials industry. In this study, a new curing method was address...

2013
Xueying Li Zheng Wang Zhenzhen Jiao

This paper investigated the curing effects on the mechanical properties of calcium-containing geopolymer mortar. Three precursors are used: Class C fly ash, Class F fly ash plus calcium hydroxide and Class F fly ash plus slag. Curing conditions included: (1) standard curing at 20 ± 3 °C and RH 95% (C); (2) steam curing at 60 °C for 24 h (S); (3) steam curing at 60 °C for 6 h (S6); and (4) oven ...

Journal: :Nanoscale 2021

Correction for ‘A ROS-scavenging multifunctional nanoparticle combinational therapy of diabetic nephropathy’ by Yuna Tong et al., Nanoscale, 2020, DOI: 10.1039/d0nr06098d.

2009
J. Cheng J. Li J. Y. Zhang

A novel trifunctional epoxy resin 4-(3, 3-dihydro-7-hydroxy-2, 4, 4-trimethyl-2H-1-benzopyran-2-yl)-1, 3-benzenediol glycidyl (shorted as TMBPBTH-EPOXY) was synthesized in our lab to improve thermal performance. Its curing behavior and performance were studied by using 4, 4′-diaminodiphenyl sulfone (DDS) as hardener with the mass ratio of 100:41 of TMBPBTH-EPOXY and DDS. The curing activation e...

2013
R. Kazemi

This paper describes some of the main results of an investigation on the effect of passing saturated lime solution with different curing time on the clayey soil. Six series of laboratory tests had been set up, on lean clay samples, to investigate simultaneously the effect of volume of solution and curing time. The samples were classified based on average volume of passing. Three categories were...

2009
Kun Huang Jianling Xia Xiaohua Yang Mei Li Haiyang Ding

Three C21-based reactive polyamides were synthesized from tung oil and different polyamines. The thermal and mechanical properties of cured products of the C21-based polyamides and diglycidyl ether of bisphenol A (DGEBA) were investigated. It was found that the cured materials were superior to those cured by C36-based polyamides in tensile strength and flexural strength and had a better flexura...

2016
K. C. Chan

This paper reports the characterization of a photosensitive benzocyclobutene (BCB), a low dielectric constant spin-on polymer for use as interlayer dielectric in the microelectronics industry. Research work is divided into three main sections. First, BCB thin film characterization was done to investigate the effects of curing conditions on BCB film thickness, dielectric properties, optical prop...

Journal: :Dental materials journal 2018
Takako Yoshikawa Alireza Sadr Junji Tagami

This study evaluated the effects of the light curing methods and resin composite composition on composite polymerization contraction behavior and resin composite adaptation to the cavity wall using μCT-3D visualization analysis and dye penetration test. Cylindrical cavities were restored using Clearfil tri-S Bond ND Quick adhesive and filled with Clearfil AP-X or Clearfil Photo Bright composite...

Journal: :Dental materials journal 2005
Naomi Tanoue Mitsuru Atsuta Shin-ichi Kitazawa Hiroyasu Koizumi Hideo Matsumura

We developed a new laboratory polymerizing unit (Twinkle MIII: M3) equipped with different light sources (a metal halide and two halogen lamps) that could illuminate independently. This study introduced the structure of the curing unit and examined the curing depth of a representative indirect composite (Artglass). The composite material was cured with the following modes: 1) M3 - halogen only;...

2004
Stefania Bandini Ettore Colombo Fabio Sartori Giuseppe Vizzari

This paper describes P–Truck Curing, a Case Based Reasoning system supporting the design of the curing phase for truck tyre production. The design of this process provides a trade–off between an optimal curing degree, to avoid imperfections in the final product, and the reduction of costs, related to thermal energy employed in the curing. Expert curing process designers store information about ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید