in this research, tribological behavior of ti-ni-p intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. in this respect, th...

Clay ball is a pavement surface defect which refers to a clump in which clay or dirt is 8 mixed with hot asphalt mixture. Clay ball is typically caused by a combination of aggregate 9 contamination of clay or soil, high aggregate moisture, and low production temperature at the 10 asphalt plant. It usually appears a few weeks or months after paving under traffic load, after being 11 liquefied an...

The vertical migration of M. incognita juveniles introduced at 20 cm from the roots was studied in five natural soils, 100% silica sand, 95% silica sand with 5% clay, 90% silica sand with 10% clay, and 95% silica sand with 5% clay as a concentrated layer. In natural soils the percentage of juveniles capable of migrating 20 cm and penetrating the roots decreased when the percentage of clay and s...

Clay minerals have been used in medicinal applications since Aboriginal times (Carretaro, 2002; Wilson, 2003). Clay poultices are used to heal wounds; people eat clays to coat stomach linings and soothe indigestion; animals eat clay containing trace elements (e.g., As) that can kill worms. The reasons that various clay minerals are effective as medicines may be as variable as the ailment, but b...

Composites based on high density polyethylene (HDPE), pine flour, and organic clay were made by melt compounding and then injection molding. The influence of clay on crystallization behavior, mechanical properties, water absorption, and thermal stability of HDPE/pine composites was investigated. The HDPE/pine composites containing exfoliated clay were made by a two-step melt compounding procedu...

Clay from deposit Bilalovac, Central Bosnia, was characterized by chemical, IR, XRD and DTA/TG analysis. The major mineral components are kaolinite, illite, muscovite and quartz. Raw clay may be used for pottery products and terracotta. Clay was beneficiated by wet method removing fraction over 20 μm. Beneficiation process increased content of kaolinite and decreased content of quartz. Benefici...

The wear behavior of two coatings (Fe49.7Cr18Mn1.9Mo7.4W1.6B15.2C3.8Si2.4 and Fe40Cr23Mo14C15B6Y2) sprayed by high-velocity air fuel technology was investigated through nanoscratch tests under ramping loads. Compared with the substrate, the Fe-based amorphous coatings exhibit lower penetration depth, higher elastic recovery, and lower wear volume, indicating the excellent wear resistance of the...

High resolution (<10 nm) transmission electron microscopy (TEM), energy-®ltering TEM (EFTEM), and electron energy loss spectroscopy (EELS) have been used for the direct microstructural imaging and analysis of clay-organic matter aggregates in ®ne-grained aquatic sediments from Jourdan River Estuary, MS, USA. EFTEM and EELS allow rapid, high-resolution spatial mapping and analysis of light eleme...

Some organisms disperse energy, associated with the transportation of resource, which is not necessarily food. Stingless bees of Central Amazonia (Melipona flavolineata and M. lateralis) collect clay in banks along streams for nest building. The moisture of the clay varies along the bank, and bees collect clay from specific location, indicating that there is some sort of preference regarding th...