The fracture strength of ZnO nanowires vertically grown on sapphire substrates was measured in tensile and bending experiments. Nanowires with diameters between 60 and 310 nm and a typical length of 2 μm were manipulated with an atomic force microscopy tip mounted on a nanomanipulator inside a scanning electron microscope. The fracture strain of (7.7 ± 0.8)% measured in the bending test was fou...

In this research, using the Modified Compression Field Theory (MCFT), a new model is proposed to predict the behavior of reinforced concrete coupling beams. The model is able to consider the effects of shear and axial forces and bending moment, simultaneously. The proposed model includes a nonlinear shear spring, an axial spring and some nonlinear springs for considering bending deformations. I...

We present an experimentally-based failure criterion for symmetric two-ply plain-weave laminates of carbon-fiber reinforced plastic. The criterion is formulated in terms of six force and moment stress resultants and consists of a set of three inequalities, related to in-plane, bending, and combined in-plane and bending types of failure. All failure parameters in the criterion are measured direc...

The purpose of the study was to evaluate marked postural asymmetry and gross joint mobility in elite female volleyball athletes. Sixty-two Czech and Slovak elite female volleyball athletes (age 20.7±2.03 years, body mass 71.1±6.18 kg, body height 1.804±.0618 m, BMI 21.8±1.78) were examined by an experienced rehabilitation physician. The set of tests included the frontal posture gross examinatio...

The aim of this paper was to describe a method of analysing the test data recorded during a Hopkinson Bar bending test. This three-point dynamic bending test was designed for testing the strength of materials under dynamic loads. It is carried out on a specimen consisting of a beam placed on two supports, which is subjected to an impact. The use of Hopkinson Bar as supports makes it possible to...

Low-temperature cracking is one of the most common road pavement distress types in Poland. While bitumen performance can be evaluated in detail using bending beam rheometer (BBR) or dynamic shear rheometer (DSR) tests, none of the normalized test methods gives a comprehensive representation of low-temperature performance of the asphalt mixtures. This article presents the Bending Beam Creep test...

In the present paper, the different techniques used for the determination of changes of surface stress of solid electrodes, as well as the kind and quality of information that can be achieved using these methods are discussed. The most important methods are briefly reviewed and advantages/drawbacks highlighted. Special attention is paid to issues related to the use of the “bending beam” (“bendi...

BACKGROUND Fixation of radial neck fractures can be achieved with a plate and screw construct or with two screws. This study evaluated the biomechanical properties of three different fixation methods following radial neck fractures. METHODS Twenty-four fourth-generation composite radii were sawed to simulate an unstable radial neck fracture. They were then instrumented with a plate and screw ...

In this paper, the data reduction equations for common delamination toughness tests are rederived for use with specimens which have bonded doublers. The common toughness tests considered here are the double cantilever beam (DCB) for mode I toughness; the end notch flexure (3ENF) and 4 point ENF (4ENF) for mode II toughness; and the mixed mode bending (MMB) test for testing under combined mode I...

BACKGROUND Surgery with pedicle screw instrumentation does not provide sufficient torsional stability. This leads to pseudoarthrosis, loosening of the pedicle screws, and, ultimately, implant failure. MATERIAL AND METHODS Functional spinal units from 18 deer were evaluated using a 6-axis material testing machine. As specimen models, we prepared an intact model, a damaged model, a cross-rod mode...