OBJECTIVES This study aims to perform a biomechanical comparison of changes on motion segments after minimally invasive percutaneous endoscopically discectomized and intact spine and to investigate the effects of endoscopic discectomy on the lumbar spine of the lamb. MATERIALS AND METHODS Ten fresh-frozen lamb spines were used in this study. Percutaneous endoscopic discectomy was performed on...

Application of surface modification methods is expected to be a supreme solution to diminishing fretting damage. In this study, our aim was to improve the fretting fatigue life of Al7075-T6 alloy by covering it with a TiN thin film hard coating using the magnetron sputtering technique. Coated specimens with the best surface hardness, adhesion strength and roughness were tested with a rotating b...

BACKGROUND Surgery with pedicle screw instrumentation does not provide sufficient torsional stability. This leads to pseudoarthrosis, loosening of the pedicle screws, and, ultimately, implant failure. MATERIAL AND METHODS Functional spinal units from 18 deer were evaluated using a 6-axis material testing machine. As specimen models, we prepared an intact model, a damaged model, a cross-rod mode...

Most industrial machine tools have a serial kinematic architecture, which means that each axis has to carry the following one, including its actuators and joints. High Speed Machining highlights some drawbacks of such architectures: heavy moving parts require from the machine structure high stiffness to limit bending problems that lower the machine accuracy, and limit the dynamic performances o...

sheet metal components design and manufacture need a great deal of experience and know-how. strip layout design is usually done with trial and error until best design for strip layout is finally achieved. knowledge for the system is formulated from plasticity theories, experimental results, and the empirical knowledge of field experts. in this paper, an algorithm which can automatically design ...

UNLABELLED Cracking of tooth structure is a frequent mechanism of clinical failure necessitating treatment. Some laser conditions, particularly those without sufficient water cooling, may cause surface cracking of dentin. Surface cracks may serve as initiation sites for the onset of catastrophic fracture under mechanical stress, resulting in failure of the dentin. In this study, the hypothesis ...

The lower limbs of motion body contain rich identification of individuals in the process of walking. A gait recognition method based on ankle joint motion trajectory and bending angle is proposed. First it obtains lower limb joint points according to each part of the body and height proportion. It obtains the position coordinates of the toe by using skeleton algorithm. According to the position...

In this paper, the laser bending process of a circular tube made of mild steel has been investigated experimentally. For this purpose, the effects of the irradiating length and the number of irradiating passes on the main bending angle of a laser bent tube are studied. In addition, the main defects of the laser tube bending process such as lateral bending angle, ovality and thickness variation ...